SAF-T-FLO HOME VISSERS SALES HOME CONTACT US INFO REQUEST
 
   
   
   
   
   
   

Saf-T-Flo EB-120 Retractable Injection Quill

Retractable Injection Quill Rated to 150 psi

  • 1/2" Brass “BallCorp” Stop
  • 1/4" Solution Tube
  • Brass Solution Tube Adaptor
  • Brass Packing Nut
  • 300 Series O-Ring Gasket
  • 150 psi Rated Stainless Steel Restraint Hook
  • Stainless Steel Limit Chain

Please see EB-120 data sheet (PDF) for more infomation.

Saf-T-Flo, EB-120, Retractable, Injection, Quill

*Brass Valve/Compression Assembly shown, Stainless Steel also available, see ordering options.

 
Ordering Information
Sample Part Number: EB-120-B-P-(Specify)-0-V
Series Valve/Compression
Material
  Solution Tube
Material
  Insertion Length   Tip Configuration   Check Valve
Seal Type
  Flexible Hose
Assembly
EB-120-   -   -   -   -   -  
 
B = Brass
S = Stainless Steel
 
P = PVC
C = CPVC
S = Stainless Steel
H = HASTELLOY® C
A = Alloy20
T = Titanium G2
  (Specify)
Note: PVC, CPVC models have a maximum warranted insertion length of 6 inches. Consult factory for lengths greater than 6 inches.
 
0 = Standard
B = 45° Bevel
 
V = Viton
E = EPDM
K = Kalrez®
  See Flexible Hose Assembly product page for ordering options.
Technical Notes
  1. PVC and CPVC Solution Tubes are Schedule 80 pipe with an O.D. of 0.540 inches and an average I.D. of 0.282 inches.
  2. Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 0.540 inches and an average I.D. of 0.344 inches. Schedule 80 Alloy Solution Tubes are available upon request - consult factory for details.
  3. Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
  4. No-Lead Brass is not available on the EB-120 series, select Stainless Steel instead as alternate.
  5. Main Connection and Inlet Connection are NPT by default. AWWA and BSP thread options are available. Consult factory for details.