Saf-T-Flo, EB-160, Retractable, Injection, Quill  
   
SAF-T-FLO HOME VISSERS SALES HOME CONTACT US INFO REQUEST
 
  -->
   
   
   
   
   
   
 

Saf-T-Flo EB-160 Retractable Injection Quill

Retractable Injection Quill Rated to 150 psi

  • 2" Brass “BallCorp” Stop
  • 1-1/2" Solution Tube
  • Brass Solution Tube Adaptor
  • Brass Packing Nut
  • 300 Series O-Ring Gasket
  • 150 psi Rated Stainless Steel Restraint Hook
  • Stainless Steel Limit Chain

Please see EB-160 data sheet (PDF) for more infomation.

Saf-T-Flo, EB-160, Retractable, Injection, Quill
 
Ordering Information
Sample Part Number: EB-160-B-P-(Specify)-0
Series Valve/Compression
Material
  Solution Tube
Material
  Insertion Length  Tip Configuration  Optional Check
Valve
  Flexible Hose
Assembly
EB-150-  -  -  -  -  -  
 
B =Brass
 
P =PVC
C =CPVC
S =Stainless Steel
H =HASTELLOY® C
A =Alloy20
T =Titanium G2
  (Specify)
Note: PVC, CPVC models have a maximum warranted insertion length of 12 inches. Consult factory for lengths greater than 12 inches.
 
0   =Standard
B   =45° Bevel
DH=Diffuser Holes
 
00 =No Check Valve
01 =PVC/Viton
02 =PVC/EPDM
03 =CPVC/Viton
04 =CPVC/EPDM
05 =Alloy
Note: Check Valve will be same material as solution tube.
  See Flexible Hose Assembly product page for ordering options.

CA and VT compliant NO-LEAD brass main connections are available. Indicate "-NL" at the end of the model number.

Technical Notes
  1. PVC and CPVC Solution Tubes are Schedule 80 pipe with an O.D. of 1.900 inches and an average I.D. of 1.476 inches.
  2. Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 1.900 inches and an average I.D. of 1.590 inches. Schedule 80 Alloy Solution Tubes are available upon request - consult factory for details.
  3. Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
  4. Main Connection and Inlet Connection are NPT by default. AWWA and BSP thread options are available. Consult factory for details