Saf-T-Flo IQ-Series Non-Retractable Injection Quill with Check Valve  
   
SAF-T-FLO HOME VISSERS SALES HOME CONTACT US INFO REQUEST
 
 
   
   
   
   
   
   

Saf-T-Flo IQ-Series Non-Retractable Injection Quill with Check Valve

Non-Retractable Injection Quill with Check Valve

  • Available in 1/2" and 3/4" MNPT main connection sizes
  • Standard pump discharge line connection is 1/2" MNPT
  • Integrated spring loaded ball check valve
  • Hastelloy┬« C, Alloy 20, or Stainless Steel springs available
  • EPDM or Viton Seats
  • PVC, CPVC Injection Quills rated to 150 psi.
  • Stainless Steel, Alloy 20, Titanium, and Hastelloy┬« C Injection Quills rated to 1500 psi.

Please see IQ-Series data sheet (PDF) for more infomation.

Saf-T-Flo IQ-Series Non-Retractable Injection Quill with Check Valve
 
Ordering Information
Sample Part Number: IQ-50-V-5-6-P-H
  Main Connection  Seal Type   Inlet  Insertion Length  Solution Tube Material  Spring Material
IQ-  -  -  -  -  -  
 
50 =1/2"
75 =3/4"
 
V =Viton
E =EPDM
K =Kalrez®
 
5 =1/2" MNPT
  (Specify)
Note: PVC models have a maximum warranted insertion length of 6 inches. Consult factory for lengths greater than 6 inches.
 
P =PVC
C =CPVC
S =Stainless Steel
H =HASTELLOY® C
A =Alloy20
T =Titanium G2
K =PVDF
 
S =Stainless Steel
H =HASTELLOY® C
A =Alloy 20

*Please consult factory for IQ-75 in alloy configurations

Technical Notes
  1. PVC and CPVC Solution Tubes are Schedule 80 pipe with an O.D. of 0.675 inches and an average I.D. of 0.403 inches.
  2. Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 0.540 inches and an average I.D. of 0.344 inches.
  3. Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
  4. PVC/CPVC models are rated to 150psi. Alloy models are rated to 1500 psi.