Saf-T-Flo SP-075 Retractable Sampling Probe  
   
SAF-T-FLO HOME VISSERS SALES HOME CONTACT US INFO REQUEST
 
 
   
   
   
   
   
   

Saf-T-Flo SP-075 Retractable Sampling Probe

Retractable Sampling Probe – 150 psi Rated

  • 3/4" Brass Ball Valve
  • 3/8" Sampling Probe
  • Brass Solution Tube Adaptor
  • Brass Packing Nut
  • 300 Series O-Ring Gasket
  • Stainless Steel Restraint Hook
  • Stainless Steel Limit Chain
  • 45° bevel tip w/ alignment guide

Please see SP-075 data sheet (PDF) for more infomation.

Saf-T-Flo SP-075 Retractable Sampling Probe

*Brass Valve/Compression Shown, Stainless Steel also available, see ordering options below.

Ordering Information
Sample Part Number: SP-075-B-P-(Specify)-B-E
Series Valve/Compression
Material
  Sampling Probe
Material
  Insertion Length  Tip Configuration  Ball Valve
Seal Type
  Flexible Hose
Assembly
SP-075-  -  -  -  -  -  
 
B =Brass
S =Stainless Steel
 
P =PVC
S =Stainless Steel
  (Specify)
Note: PVC models have a maximum warranted insertion length of 6 inches.
Consult factory for lengths greater than 6 inches.
 
B   =45° Bevel
 
V =Viton
E =EPDM
/td>
  See Flexible Hose Assembly product page for ordering options.
Technical Notes
  1. 3/8" PVC Solution Tubes are Schedule 80 pipe with an O.D. of 0.675 inches and an average I.D. of 0.403 inches.
  2. 3/8" Alloy Solution Tubes are Schedule 40 pipe with an O.D. of 0.675 inches and an average I.D. of 0.473 inches. Schedule 80 Alloy Solution Tubes are available upon request - consult factory for details.
  3. Saf-T-Flo does not recommend nor warranty PVC/CPVC Solution Tubes where velocities in the process main exceed 6 fps.
  4. No-Lead Brass is not available on Retractable Sampling Probes, select Stainless Steel instead as alternate.
  5. Main Connection and Inlet Connection are NPT by default. BSP thread options are available. Consult factory for details.
  6. Inlet Ball Valve will be same material as sampling probe.