Plastic Valves, Valve Controls, Valve Actuators For Industry

Vissers Sales Corp providing plastic valves, valve controls, butterfly valves, control valves, pressure relief valves, manual valves, check valves, automated valves, pneumatic valve actuator and electronic valve actutor solutions for industry.

	Manual Valves
	True Union Ball Valves True Union Design: This makes these valve very easy to maintain by allowing for easy removal from a piping system without breaking down piping connections.
	ProFile2 Control Valves Hayward ProFile2 corrosion resistant, actuator-ready proportional control ball valves provide two linear flow curves, one for fast opening and one for slow opening.
	Three-Way Ball Valves Hayward Three-Way Ball Valve for Actuator Mounting come standard with an "NT" ball that permits the flow to be diverted from the bottom port to either the left or right ports, there is no off position.
	Three-Way Lateral Ball Valves Hayward Three-Way Lateral Ball Valves come standard with a ball that permits the flow to be diverted from the center port to either the left or right ports, there is no off position.
	QIC Ball Valves Hayward's rugged, low cost QIC2 all plastic PVC ball valves incorporate many design features found only on higher cost ball valves.
	Butterfly Valves - 1-1/2" to 12" Hayward Plastic Butterfly Valves up to 12" are rated at a full 150 psi. Unlike other plastic butterfly valves, Hayward valves are constructed from a one piece body that incorporates fully supported flange bolt holes (the valve has the same number of bolt holds as the matching 150# ANSI flange).
	Butterfly Valves - 14" to 24" Larger size butterfly valves from Hayward are specially designed to take into account applications parameters encountered in larger size piping systems.
	Calibration Cylinders
	Calibration Cylinders Griffco Calibration cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump.
	Glass Calibration Cylinders Griffco Borosilicate Glass Calibration Cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump.
	Check Valves
	True Union Ball Check Valves Hayward True Union Ball Check Valves prevent reversal of flow in piping systems.
	Swing Check Valves Hayward swing check valves have up to twice the temperature/pressure rating of other plastic swing check valves, and can replace metal valves in many applications.
	Y Check Valves Hayward Y-Check Valves prevent reversal of flow in piping systems.
	Y Check Valves Spring-Loaded Hayward's Spring Loaded Y-Check Valves give positive protection against reversal of flow in a piping system, even in the absence of back pressure.
	Control Valves
	Angle Valves Hayward Angle Valves are used in tight spaces where a 90 degree change in flow direction is needed and there is not enough room for extra, additional fittings.
	Back Pressure Valves - Griffco Griffco diaphragm back pressure valves are designed to enhance the performance of chemical feed systems by applying a continuous back pressure to the chemical feed pump, while also acting as an anti-syphon valve.
	Needle Valves Hayward Needle Valves are used for accurate metering of fluids.
	Pressure Relief Valves - Griffco Griffco diaphragm back pressure valves are designed to enhance the performance of chemical feed systems by applying a continuous back pressure to the chemical feed pump, while also acting as an anti-syphon valve.
	Pressure Relief Valves - Hayward Hayward Pressure Relief Valves protect piping system components from damage due to over pressurization.
	Pressure Regulating Valves Hayward plastic pressure regulators prevent downstream pressure from exceeding a preset pressure.
	True Union Air Release Valve Hayward's True Union Air Release Valve prevents overflow of the process fluid as a tank is being filled while allowing air to escape, minimizing the risk of the tank expanding as the result of compressing trapped air.
	Universal Stopcocks For on/off, restricted flow or sampling applications, the Hayward StopCock is easily adaptable to any piping connection.
	Automated Valves
	Solenoid Valves For maximum application flexibility these heavy duty solenoid valves have been designed so that no pressure differential is needed for them to operate reliably.
	Electrically Actuated True Union Ball Valves The EA electrically actuated true union ball valve is the perfect answer to cost sensitive, automated valve applications that can't get by with less than a full featured valve and actuator combination.
	Pneumatically Actuated Diaphragm Valves Hayward plastic pneumatically actuated diaphragm valves are designed for the reliable, remote control of liquids in piping systems.
	Actuator-Ready Valves
	True Union Ball Valves - Actuator Ready Hayward True Union Ball Valves, designed for actuator mounting, are ideal for reliable remote control of process fluids in a piping system.
	Butterfly Valves - Actuator Ready These valves are ideal for reliable control of process fluids in a piping system. They enable all Hayward actuators and accessories to be mounted quickly with accurate alignment and proper support.
	Actuator-Ready Three-Way Ball Valve Hayward Three-Way Ball Valve for Actuator Mounting come standard with an "NT" ball that permits the flow to be diverted from the bottom port to either the left or right ports, there is no off position.
	ProFile2 Ball Valves - Actuator Ready Hayward ProFile2 corrosion resistant, actuator-ready proportional control ball valves provide two linear flow curves, one for fast opening and one for slow opening.
	Electric Actuators
	Series EAU Hayward EAU Electric Actuators come standard with an all polypropylene housing for superior corrosion resistance.
	Series EVR For on/off applications where it may be necessary to manually override the actuator operation, the Series EVR Valve Actuator is an excellent choice.
	Series EJM EJM Electric Valve Actuator has been designed to meet the requirements of most applications without the need for extra cost, add-on options.
	Series EVS/EVT This is the electric actuator that can do it all. There are models to work with all size true union and three-way ball valve and butterfly valves up to 12" in size in both on/off and modulating applications.
	Pneumatic Actuators
	Series PMD/PMS Hayward PMD and PMD pneumatic valve actuators feature heavy-duty, corrosion resistant construction. These actuators are designed to stand up to most corrosive environments and other harsh conditions without the need for epoxy coatings.
	Series PAD/PAS Hayward PAD and PAS plastic pneumatic actuators feature a housing made of corrosion resistant plastic.
	Series PKD/PKS Hayward PKD and PKS pneumatic valve actuators feature a proven vane design for extremely reliable service with minimum maintenance.
	Series PCD/PCS Hayward Series PCD and PCS Pneumatic Actuators are the best choice for applications requiring pneumatically actuated true union ball valves, three-way ball valves or butterfly valves.
	Actuator Controllers
	Electric Actuator Control Station Hayward LS Control Stations can be ordered factory mounted directly to a Hayward actuator making a neat, compact valve/actuator package.
	Bus Control System Hayward's unique Bus Control System for multiple automated valve applications will dramatically reduce installation and maintenance costs... as well as provide a level of enhanced flexibility and utility never before possible.
	Universal Control Panel Hayward's Universal Control Panel is used to control the operation of 5 to 25 electrically or pneumatically actuated valves by taking advantage of control relay technology.