Pump Diaphragms from Versa-Matic

Pump Diaphragms, Versa-Matic, Versamatic, York Fluid ControlsVersa-Matic has distinguished itself in the pump industry as a leading provider of innovative pump diaphragm designs. Longer pump life, trouble-free operation, and stress-free maintenance are just some of the benefits you'll find in Versa-Matic's extensive line of pump diaphragms:

Pump Diaphragms, Versa-Matic, Versamatic, York Fluid Controls

Versa-Rugged VR™ Series Pump Diaphragms
Eliminate your worries about pump failure — now you can enjoy extended pump life with Versa-Matic's Versa-Rugged VR™ Series Diaphragms. Made of high quality, fabric-reinforced, standard rubber, these diaphragms outperform and outlive standard diaphragms.

Versa-Rugged VR™ Series Pump Diaphragms . . .

  • significantly reduce maintenance costs and downtime

  • are interchangeable with Wilden® 1-1/4", 2" & 3" clamp style pumps

  • come standard on Versa-Matic pumps requiring rubber diaphragms

  • are available in Buna-N®, Neoprene, Nordel®, and Viton®

 
Pump Diaphragms, Versa-Matic, Versamatic, York Fluid Controls

Versa-Dome Pump Diaphragms
Get the diaphragm that lasts up to 300% longer than standard diaphragms. Versa-Matic's Versa-Dome Diaphragms have a simple, smooth dome shape that delivers the flex across the entire face of the diaphragm, resulting in longer life. And they're so flexible, they can be installed and removed without the use of pry bars.

Versa-Dome Pump Diaphragms. . .

  • eliminate complex angles that cause internal stress and limited flexibility

  • are available in all rubber and thermoplastic materials

  • offer increased flex life over other diaphragm designs

  • can be used in Versa-Matic and Wilden® 2" and 3" pumps

 
Pump Diaphragms, Versa-Matic, Versamatic, York Fluid Controls

FDA Hytrel Pump Diaphragms
If you need a pump that is approved for use with food and dairy media, then you need Versa-Matic's FDA Hytrel Thermoplastic Diaphragm. Ideally suited for food processing where USDA and 3A standards are not required, the FDA Hytrel meets FDA standards for food processing and food service industries.

FDA Hytrel Thermoplastic Pump Diaphragms...

  • use FDA-approved 4059FG-grade Hytrel® rubberized plastic

  • are excellent in abrasive product transfer applications

  • are also available for Wilden® pumps

 
Pump Diaphragms, Versa-Matic, Versamatic, York Fluid Controls

TPE-XL Pump Diaphragms
Get the chemical resistance of Teflon at a lower cost with Versa-Matic's TPE-XL Thermoplastic Diaphragm. Exceptional computer-aided design engineering combines with Versa-Matic's history as the innovator of thermoplastic XL diaphragms to bring you a product that provides increased strength and performance.

TPE-XL Thermoplastic Pump Diaphragms. . .

  • offer excellent abrasion resistance

  • are also available for Wilden® pumps

 
Pump Diaphragms, Versa-Matic, Versamatic, York Fluid Controls

Versa-Tuff Pump Diaphragms

Do away with changing pumps between applications—Versa-Matic's Versa-Tuff Teflon Diaphragms work for nearly every type of fluid. Combining the chemical resistance of Teflon with the flex life of rubber, Versa-Tuff Teflon Diaphragms have nearly three times the burst strength of ordinary Teflon overlays. This is possible because Teflon overlay is 100% bonded to a reinforcing rubber backing, supporting the diaphragm evenly with each stroke.

Versa-Tuff Teflon Pump Diaphragms. . .

  • have a longer flex life than two-piece diaphragms

  • exhibit greater impact and tensile strength than standard Teflon overlays

  • use the same shaft and plates as standard two-piece Teflon diaphragms

  • have been tested to over 23 million cycles without failure

  • are interchangeable with Wilden® 1-1/4", 2" & 3" clamp style pumps

 

York Fluid Controls Limited | 2 Westwyn Court, Brampton, Ontario, Canada ON L6T 4T5 | Tel: 905 454 4013 | Toll Free: 877 454 6066 : sales@yorkfluid.com