Multistage Pumps - Multistage Booster Pumps - Circulator Pumps


AMT PUMPS, IPT PUMPS, GR PUMPS - Multistage Pumps - Multistage Booster Pumps - Circulator Pumps with many options. Available in Cast Iron, Aluminum and many different seal options. Also available with Honda Engines, Briggs and Stratton Engines, and Yanmar Diesel Engines.

MSV1 Multistage Booster Pumps

These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, high pressure washdown, booster service, and fire protection/ sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.

  • Cast Iron w/ Stainless Steel

  • Up to 325 PSI and 12 GPM

MSV1 Multistage Booster Pumps


MSV3 Multistage Booster Pumps

These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, high pressure washdown, booster service, and fire protection/sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.

  • Cast Iron w/ Stainless Steel

  • Up to 320 PSI and 23 GPM

MSV3 Multistage Booster Pumps


MSV5 Multistage Booster Pumps

These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, high pressure washdown, booster service, and fire protection/sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.

  • Cast Iron w/ Stainless Steel

  • Up to 320 PSI and 44 GPM

MSV5 Multistage Booster Pumps


Inline Circulator Pumps

AMT Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. All models are powered by a single phase 115 VAC ODP 56J NEMA frame 1/4 HP electric motor with 1/2-14 NPSM conduit connection. Direct coupled design eliminates stub shaft, oiled bearing and coupling, reducing maintenance. Pumps are interchangeable with other manufacturers, see cross reference on specification page.

* Maximum temperature applies to water only.

  • Cast Iron or Silicon Bronze Construction

  • Up to 58 GPM

Inline Circulator Pumps


1-1/2" Inline Circulator Pumps

AMT Inline Circulator Pumps are designed for continuous duty industrial/commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Pumps are powered by a 56C NEMA Totally Enclosed Fan Cooled (TEFC) frame electric motor with 1/2" conduit connection. Pumps are interchangeable with other manufacturers.

* Maximum temperature applies to water only.

  • Cast Iron or Silicon Bronze Construction

  • Up to 130 GPM

1-1/2" Inline Circulator Pumps


3 " Inline Circulator Pumps

AMT Inline Circulator Pumps are designed for continuous duty industrial/commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Pumps are powered by a 56C NEMA frame electric motor with 1/2" conduit connection. Pumps are interchangeable with other manufacturers, see cross reference on specification page.

*Maximum temperature applies to water only.

  • Cast Iron or Silicon Bronze Construction

  • Up to 150 GPM

3 " Inline Circulator Pumps


 


York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world"s leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch