Centrifugl Pumps - Straight Centrifugal Pumps - End Suction Centrifugal Pumps - Solids Handling Centrifugal Pumps


AMT PUMPS, IPT PUMPS, GR PUMPS - Straight Centrifugal Pumps - Naval Bronze Straight Centrifugal Pump - Laundry Tray Pumps - Bronze Inline Centrifugal Pumps - Solids Handling End Suction Centrifugal Pumps - High Head End Suction Centrifugal Pumps - Washdown Pumps - Stainless Steel Solids Handling End Suction Centrifugal Pumps - Heavy Duty Solids Handling End Suction Centrifugal Pumps - End Suction Chemical Pumps - Cast Iron 1750 RPM Solids Handling End Suction Centrifugal Pumps - with many options. Available in Cast Iron, Aluminum and many different seal options. Also available with Honda Engines, Briggs and Stratton Engines, and Yanmar Diesel Engines.

Bronze Marine Straight Centrifugal Pumps

The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and feature provisions for the installation of a seal wash, front drain plug and pullfrom- rear design. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a stainless steel shaft. On/off switch and line cord are standard. The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications in live well tanks, circulation and chemical transfer. This pump is fitted with a 1/8 HP, 12 Volt DC, 3700 RPM motor. Pumps are not self-priming and require flooded suction.

  • Bronze Construction

  • Up to 17 GPM

Bronze Marine Straight Centrifugal Pumps


1-1/4" Laundry Tray Pump

The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a “laundry tray” pump, but can be used for most gravity fed general service pumping applications. The 1/8" diameter solids handling open impeller design makes it particularly adaptable to dirty, as well as clean liquids and is inherently resistant to clogging. The pump is constructed of cast aluminum and features 1-1/4" NPT suction and discharge ports. Pump is powered by a 1725 RPM, 115 VAC, 1/4 HP motor. Pumps are not selfpriming and require flooded suction.

  • Cast Aluminum w/ Buna

  • Up to 24 GPM

1-1/4" Laundry Tray Pump


1-1/2" Bronze Inline Centrifugal Pumps

AMT Bronze Inline Centrifugal pumps are designed for use with most gravity fed service applications requiring liquid transfer. All models are fitted with a self-cleaning stainless steel impeller for maximum 1/8" diameter solids handling. Units feature pull-from-rear design for easy servicing without removing piping. Pumps are not self-priming and require flooded suction.

  • Bronze Construction

  • Up to 130 GPM

1-1/2" Bronze Inline Centrifugal Pumps


Solids Handling End Suction Centrifugal Pumps

AMT Solids Handling End Suction Centrifugal pumps are designed for continuous-duty low pressure OEM, Industrial/Commercial and general service applications including circulation, chemical processing, liquid transfer, dirty water and cooling. These durable and compact pumps are available in a variety of construction and seal materials to meet your specification. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impeller prevents clogging and handles solids of 1/8" diameter. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.

  • Cast Iron, Bronze or Stainless Steel

  • Up to 90 GPM

Solids Handling End Suction Centrifugal Pumps


High Head Straight Centrifugal Pumps

AMT High Head End Suction Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling, sprinkler/fire protection systems and pressure boosting.

These heavy duty high pressure pumps are available in a variety of construction and seal materials to meet your specification. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency closed impeller maximizes performance. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) or Open Drip Proof (ODP) motors. Pumps are not self-priming and require flooded suction.

  • Cast Iron, Bronze or Stainless Steel

  • Up to 120 GPM

High Head Straight Centrifugal Pumps


12 Volt DC High Head Washdown Pumps

AMT 12 Volt DC Washdown pumps are designed for OEM, septic service, pumper and marine applications requiring a DC motor. The motor has a one hour duty rating and is furnished with a stainless steel shaft. This washdown duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Pumps are not self-priming and require flooded suction.

Premium 12 Volt DC washdown duty motors are built to handle high pressure washdown and damp/wet environments. The motor features epoxy paint, condensate drains, interior coating to protect against moisture or corrosion, special shaft seals to retard water, 12 Volt DC stud connections with o-ring seals, oversized brushes assuring longer brush life and base mount. Units are not submersible in liquids.

  • Cast Iron or Stainless Steel

  • Up to 55 GPM

12 Volt DC High Head Washdown Pumps


Stainless Steel Straight Centrifugal Pumps

AMT Stainless Steel Solids Handling End Suction Centrifugal pumps are designed for continuous duty high flow and high pressure applications including: chemical processing, liquid transfer, cooling, pressure boosting, circulating, dirty water and applications requiring contaminant free pumping. Constructed of rugged deep drawn stainless steel for durability and corrosion resistance. Investment cast stainless steel closed impeller for enhanced performance, high efficiencies and handles a maximum of 1/8" diameter solids.

All models include Viton® Type 21 mechanical seals and O-rings which offer a broad range of chemical compatibility. Cast iron motor adapter provides a positive and rigid mounting to motor. Pumps include Totally Enclosed Fan Cooled (TEFC) motors or Open Drip Proof (ODP) motors by special quote. Pumps are not self-priming and require flooded suction.

  • Stainless Steel w/ Viton

  • Up to 156 GPM

Stainless Steel Straight Centrifugal Pumps


Heavy Duty Straights Centrifugal Pumps

AMT Heavy Duty Solids Handling End Suction Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/8" diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.

  • Cast Iron, Bronze or Stainless Steel

  • Up to 500 GPM

Heavy Duty Straights Centrifugal Pumps


End Suction Chemical Pumps

AMT Solids Handling End Suction Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handles solids up to 3/8" diameter depending on the model. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.

  • Cast Iron w/ EPDM/EPR

  • Up to 180 GPM

End Suction Chemical Pumps


2"x 1.5" 1750rpm Straight Centrifugal Pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pullfrom- rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4" diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

  • Cast Iron w/ Bronze Impeller

  • Up to 180 GPM

2"x 1.5" 1750rpm Straight Centrifugal Pumps


3"x 2" 1750rpm Straight Centrifugal Pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pull-from-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4" diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

  • Cast Iron w/ Bronze Impeller

  • Up to 490 GPM

3"x 2" 1750rpm Straight Centrifugal Pumps


4" x 3" 1750rpm Straight Centrifugal Pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pull-from-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4" diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

  • Cast Iron w/ Bronze Impeller

  • Up to 800 GPM

4" x 3" 1750rpm Straight Centrifugal Pumps


6" x 4" 1750rpm Straight Centrifugal Pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pull-from-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4" diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

  • Cast Iron w/ Bronze Impeller

  • Up to 1700 GPM

6" x 4" 1750rpm Straight Centrifugal Pumps


 


York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world"s leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch