Chemical Process Pumps AnsiPro AP96 Series

Chemical Process Pumps, AnsiPro AP96 Series, AnsiPro PumpsThe AnsiPro AP96 Series ANSI Chemical Process Pumps are available in Carbon steel, 316 SS, CD4M materials and are all stock items. Also available in special orders with Hastelloy B&C, Alloy 20, HI-Chrome Iron, Monel, Nickel, Titanium and Zirconium materials. The AP96 Series has 26 different sizes available. Customer requirements for pumping erosive and corrosive liquids can be satisfied with capacities ranging from 3 gallons per minute to 6000 gallons per minute.

All AnsiPro AP96 Series pumps and parts are 100% interchangeable with the Goulds 3196, Peerless 8196, Griswold 811 and the Summit 2196 models. The AnsiPro APD Series is 100%interchangeable with the Durco Mark Series ANSI pumps.

Chemical Process Pumps, AnsiPro AP96 Series, AnsiPro PumpsAnsiPro AP96

  • POSITIVE SEALING
    Fully confined gasket at casing joint protects alignment fit from liquid.

  • ONE INCH BRASS OIL SIGHT GLASS WITH STEEL REFLECTOR
    Actual oil level and condition easy monitored

  • HEAVY DUTY SHAFT WITH RENEWABLE SHAFT SLEEVE
    Maximum shaft deflection less than .002in. (.05mm) at face of the stuffing box insures long seal and bearing life and low maintenance. A hook-type shaft sleeve (available in a wide variety of corrosion resistant materials) is free to expand with temperature variations.

  • SIMPLE AND FAST EXTERNAL IMPELLER ADJUSTMENT
    Original high efficiency maintained by impeller adjustment resulting in long term energy savings.

  • LABYRINTH OIL SEAL STANDARD INPRO®
    VBXXD Bronze labyrinth seals for chemical resistance prevent premature bearing failure caused by lubricant contamination and loss of oil.
    (Carbon-filled PTFE, 303, 316, A20 available)
    • Top centerline discharge for air handling, self venting.
    • All pumps have class 300 wall thickness as standard
    for longer life under corrosive/erosive conditions.
    Resists high pipe forces.
    • Back pull out design.
    • Integral feet.

  • UNIQUE OPEN IMPELLER
    With back pump-out vanes assure best performance and efficiency and lowest NPSH requirements.

  • MAXIMUM SEALING FLEXIBILITY
    Choice of packed box or mechanical seal. Any type (cartridge or non cartridge, inside or outside, single or double, balanced or unbalanced)
    Almost any seal will fit without modification of the pump.

  • PHONOGRAPH FLANGE FINISH FOR IMPROVED GASKET SEALING AT FLANGE

  • OIL LUBRICATION STANDARD
    Large oil chamber assures proper bearing temperature on high temperature applications coated with tnemec, epoxy coating to eliminate burrs and flaking of steel into oil reservoir. New and improved design.

AnsiPro AP96 Features

  • ANSI B73.1M Standard Dimensions.

  • Maximum interchangeability, gives minimum spare parts inventory.

  • Back-Pull-Out design permits quick inspection of

  • repairs of rotating elements without disturbing electrical and piping connections.

  • Wide variety of metallurgy available including Hastelloy B and C, Alloy 20, Hi-Chrome Iron, Nickel, Titanium
    and Zirconium.

AnsiPro AP96 Range

  • CAPACITY - 60000GPM / 1364 M3/H.

  • HEAD - 730 FEET / 223 M.

  • TEMPERATURE - 700°F / 371°C.

  • WORKING PRESSURE - 375 PSI / 2586 KPA

AnsiPro AP96 Series Pump Brochure

AnsiPro Pump Company | AnsiPro 96 | AnsiPro 96 LF Series | AnsiPro 96 SP Series


York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world's leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch