Corken Pumps - IDEX Corporation

Corken Pumps, IDEX Corporation, York Fluid Controls LimitedCorken Pumps, IDEX Corporation, York Fluid Controls LimitedCorken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors.

Corken's exceptional reputation in the LPG industry is built upon decades of maintaining the highest quality and customer service standards.

Corken has transferred that same dedication to the development of pumps and compressors for a wide range of industrial markets.

LPG Products

Compressors

Horizontal Compressors, LPG, Coro-Vane, Corken, York Fluid Controls

Horizontal Compressors LPG

Corken's horizontal compressors offer the largest capacity in liquid transfer. They are used to unload LPG marine barges, which typically are not equipped with on-board transfer equipment.

Vertical Compressors, LPG, Corken, York Fluid Controls

Vertical LPG Compressors

Corken gas compressors are designed for use in liquid transfer through vapor displacement, vapor recovery, scavenger and portable applications. Whether it is gas recovery from cylinders or barge unloading, Corken has a compressor for your application.

Stationary Pumps

Stationary Pumps, Z Series, Corken, York Fluid Controls

Z Series Stationary Pumps

The new three-inch Z3500 LPG pump is designed for stationary and foot mounted truck applications. The Z3500 stationary pump has the same locked rotor design used in the Corken Z-Series truck pumps to ensure long pump life and excellent performance.

Coro-Vane, Positive Displacement Pumps, Corken, York Fluid Controls, Corken, York Fluid Controls

Coro Vane® Series Stationary Pumps

Corken Coro-Vane® pumps are positive displacement pumps. They produce a maximum differential pressure of 125 psig (8.6 bar g). Corken manufactures four sizes of Coro-Vane pumps, ranging from 1gpm to 350 gpm (0.2–79.5 m3/hr). Corken offers these pumps with v-belt or direct-drive mounting options.

Coro-Flo, Stationary Pumps, Corken, York Fluid Controls

Coro Flo® Series Stationary Pumps

The Coro-Flo® pump is offered in three different model drive configurations. The C-Model configuration has the pump close coupled to a motor (shown below). The F-Model has a separate pump body and is directly driven through a coupling.

Side Channel Pumps, SC-Series, Corken, York Fluid Controls

Side Channel Series Pumps

SC-Series Side Channel Pumps are typically used for cylinder filling, vaporizer feeding, pumping from underground storage and bulk filling operations.

Autogas, Pumps, Corken, York Fluid Controls

Autogas Series Pumps

The autogas market is unique with its own distinct needs. Corken with the aid of marketers, designers and installers of autogas systems has designed a new pump that is specifically designed to meet these needs.

Truck Pumps

Coro-Vane, Truck Pumps, Corken, York Fluid Controls, Corken, York Fluid Controls

Z-Series Coro-Vane® Truck Pumps

The Z-Series Coro-Vane® Truck Pumps are specifically designed to perform in such severe operating conditions as high differential pressure, pump overspeeding, poor suction conditions and heavy thrust loads associated with a power take-off (PTO) drive system.

Bypass Valves

ZV200, Bypass Valve, Corken, York Fluid Controls

ZV200 Bypass Valve

The two-inch ZV200 is a low pressure build-up bypass valve designed for applications requiring protection for positive displacement pumps. Specifically designed for protecting pumps with capacities up to 250 gpm (946 L/min).

Bypass Valves, Corken, York Fluid Controls

B166, T166 and B177 Bypass Valves

B166 - Used with all cylinder filling pumps. (Coro-Flo Models and low flow side channel pumps).

T166 - Used with large capacity pumps filling various sizes of tanks and bottles such as those used with delivery trucks or multi-spot cylinder-filling plants.

B177 - Used in liquefied-gas bulk plant installations for the loading and unloading pumps.

Industrial Pumps

Low, Pressure, Pumps, CP-Series, Coro-Vane, Corken, York Fluid Controls

Industrial Coro-Vane Series Pumps

Corken manufactures variations of its positive displacement pumps, sliding vane design for various applications. Each of these offers unique features for the transfer of hazardous, non-lubricating liquefied gases and low viscosity liquids. For more information, review the various pump styles offered by Corken below.

Coro-Flo, Stationary Pumps, Corken, York Fluid Controls

Industrial Coro-Flo Series Pumps

The Coro-Flo® pump is offered in three different model drive configurations. The C-Model configuration has the pump close coupled to a motor (shown below). The F-Model has a separate pump body and is directly driven through a coupling. And finally, the DS/DL Model pumps are mounted on a special bracket which will accept standard C-face motors.

Side Channel Pumps, SC-Series, Corken, York Fluid Controls

Industrial Side Channel Series Pumps

Corken SC-Series pumps are a rotary side channel design. They produce a maximum differential head of 1,150 ft (350 m). The side channel pump is offered in six different sizes, each ranging from one to eight stages.

Stainless Steel, Positive Displacement Pumps, Coro-Vane, Corken, York Fluid Controls

Industrial Stainless Steel Coro-Vane Series Pumps

Corken's Sabre Series SSV pumps are stainless steel positive displacement pumps. They produce a maximum differential pressure of 200 psig (13.8 bar g). Stainless steel positive displacement pumps can handle discharge pressures up to 400 psig (27.6 bar).

Petroleum Pumps

PZ-Series, Coro-Vane, Petroleum Pumps, Corken, York Fluid Controls

PZ-Series Coro-Vane® Petroleum Pumps

The PZ-Series Coro-Vane® Petroleum Pumps are a positive displacement vane design. They produce a maximum differential pressure of 125 psig (8.6 bar) and a maximum working pressure of 200 psi (13.8 bar). Corken manufactures two sizes of PZ-Series Coro-VaneŇ pumps with a capacity up to 160 gpm (605 L/min).

Industrial Compressors

Industrial Compressor D-Style, Corken, York Fluid Controls, Corken, York Fluid Controls

Industrial D-Style Compressor

Industrial D-Style Compressors are extremely versatile. They can be used to transfer liquids between tanks, off-load/load out liquids, recover residual vapor, pressure boosting, gas blanketing, gas gathering, evacuate vapors for maintenance purposes, etc.

T-Style Compressor, Corken, York Fluid Controls

Industrial T-Style Compressor

T-style compressors can handle the same applications as a D-Style compressor. These include transfer of liquids between tanks, off-load/load out liquids, recover residual vapor, pressure boosting, etc. The T-style, however, offers the advantage of precise leakage control.

Industrial, Chlorine Compressors, Corken, York Fluid Controls

Industrial New Chlorine Compressor

These New Chlorine Compressors were specifically designed for applications involving the transfer and recovery of Chlorine. Railcar unloading is the most typical application although these compressors are also used in the recovery residual vapors, and pressure boosting.

Industrial Horizontal Compressors, Corken, York Fluid Controls, Corken, York Fluid Controls

Industrial Horizontal Compressor

The horizontal compressors offer the largest capacity of any of Corken's compressor lines. This line of compressors can be used for unloading tankers or multiple railcars, wellhead gas recovery, pressure boosting, and gas blanketing.


York Fluid Controls Limited, York, Fluid, Controls, Limited
York Fluid Controls Limited | 2 Westwyn Court, Brampton, Ontario, Canada ON L6T 4T5 | Tel: 905 454 4013 | Toll Free: 877 454 6066 : sales@yorkfluid.com