Self Priming Centrifugal Pumps | Renner RM 2.1 Pump | Flux Renner Pumps


Renner, Self Priming, Magnetically, Coupled, Centrifugal Pumps, Type, RM 2.1, Flux, PumpsMagnetically coupled centrifugal pumps of building group 2.1 are self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.

Constructional design

Housing, impeller magnet coating and rear casing can be made of either PPS* or PVDF**. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM, EPDM or FEP (optionally available). *Impeller made of PPS. **Ceramic impeller.

  • For aggressive and neutral liquids

  • For short-term and continuous operation

The pump is available in:

  • PPS, PVDF

  • Pump sizes 9/8 | 35/17

Motor:

  • 230/400V three-phase motor or

  • 230V single-phase ac capacitor start-and-run motor, 370-550 watts, 50 Hz, insulation class F, protection class IP 54 motor speeds of 1,450 and 2,900min-1
    – Other voltages and frequencies are available on request. –

Weight:

  • approx. 15.4 to 20 LBS

Fluid temperature range:

  • PPS -4° to +212°F

  • PVDF -4° to +176°F

Pressure range: *

  • PPS up to 58 PSI

  • PVDF up to 58 PSI

Position of terminal box:

  • on the right

Position of discharge port:

  • vertical

Ports:

  • suction port: G½ internal thread

  • discharge port: G½ internal thread

Accessories (optional):

  • explosion-proof motor

  • motor circuit-breaker for 230/400V three-phase current

  • connection cable 5m long with CEE plug

  • pilotherm for 230V ac

  • ON/OFF switch with connection cable 2.5m long and plug for 230V ac

  • flexible hoses

  • hose connection consisting of several pieces

  • hose nipple with G½ external thread

* Maximum system pressure depends on the temperature of the fluid delivered.

Flux Renner Pump Catalogue

<< Back to Renner Magnetic Drive Pumps >>


York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world"s leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch