Submersible Axial Flow Pumps Hydra-Tech SP6


Axial Flow High Volume Pumps

S6P, 6", Hydraulic, Submersible, Axial Flow, High Volume, PumpsThe Hydra-Tech SP6 6" Axial Flow High Volume Pumps is a lightweight axial flow pump designed for pumping high volumes of water at relatively low heads. The propeller design allows this pump to driven by small hydraulic power sources such as small tractors, backhoes or our 10 to 15 HP power units. This pump is great for lake draining, tank filling, flood irrigation, arial firefighting and cofferdam de-watering.

Quick Specs

  • Discharge Size: 6 Inch

  • Maximum Flow: 1180 GPM (4450 LPM)

  • Maximum Head: 25 Feet (7.5 M)

  • Hydraulic Input: 7 GPM (26 LPM) Max.

  • Hydraulic Pressure: 2500 PSI (170 Bar) Max.

  • Weight: 43 lbs. (19 Kg)

Key Features

  • High Volume Axial Propeller design

  • Very Light Weight allows for one man set-up

  • Small Overall Size allows for use in very tight spaces

  • Variable Speed hydraulic drive

  • Oil Lubricated Seals (can run dry)

  • Dependable gear type hydraulic motor

  • Safe Hydraulic Drive can be used where electric power is hazardous or impractical

  • Operates with our HT10 to HT15 power units or other hydraulic power sources capable of flows of 5 - 7 GPM

Specifications

  • WEIGHT: 43 lbs. (19 kg)

  • HEIGHT: 16" (41 cm)

  • DIAMETER (@ widest point): 11 3/4" (30 cm)

  • DISCHARGE: 6" NPT(F)

  • SOLIDS HANDLING: 3/4" (2 cm)

  • HOSE PORTS: 1/2"

  • NPT PUMP BODY: Heat Treated Aluminum

  • PROPELLER: Ductile Iron

  • WEAR RING: Ductile Iron

  • SHAFT: Plated Steel

  • SHAFT SEAL: Carbon/Ceramic (Std)

  • ELASTOMERS: Buna N (Std)

  • HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)

  • INPUT FLOW: Max. 7 GPM (26 LPM)

  • INPUT PRESSURE: Max. Cont. 2500 PSI (170 Bar)

  • POWER SOURCE: Any Open Center Hydraulic System

Recommended Power Units: HT11D, HT13G, HT11DXR

SP6 Spec Sheet


York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world"s leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch