Slade Pyro-Tex Woven Gasket Sheet


Slade Pyro-Tex Woven Gasket Sheet

A resilient, compressed sheet... that works!

Ready to be cut for use in severe conditions.

Services

  • Up to 4500 psi/310bar

  • Up to 1400°F/1000°C*

  • High equipment wear (scratches/pores)

* Contact us for application suggestions, especially for high pressures and temperatures (e.g., over 1000°F/538°C). As the operating temperature increases, the pressure limit of the gasket decreases.

Reinforced with Flat Metal

  • Individual graphite foil weaving yarn is reinforced with stainless steal strips;

  • Yarns are then woven;

  • Woven compressed gasket sheet is then rolled into cardboard tubes for shipment.

Avalable in sizes as large as 80" x 160" sheets

Advantages

  • Surface nodules promoteflexibility and flow into oxidized surfaces & scratches, pores and steam cuts.

  • Flat metalic leaf springs, jacketed with graphite foil, make this 80" x 80" sheet the most resilient gasket you will need.

  • It takes physical abuse like no other graphite foil, handling and feeling like tough leather.

  • Pyro-Tex gasket sheet eliminates the need for a compressing ring to prevent crushing.

  • Layering of sheets allows for greater thicknesses.

  • Eliminates shipping pallets: Gasket Sheets individually packaged in 3" cardboard tubes for easy storage.

  • Die cut or shears to shape, do NOT use circle cutters.

  • Available in sizes as large as 80" x 160" sheets.

  • Single sheet thickness: nominal 0.075".

Leaf Springs

Stainless steel foil is encapsulated in a thick expanded graphite foil jacket. These metal reinforced graphite strands, Slade’s weaving yarns, are woven into a tough, resilient cloth-like sheet. The flat metal leaf springs at the core of each strand crisscross each other throughout the cloth to impart an enduring resiliency. The woven sheets are compressed to increase density to form a leak tight gasket sheet.

Gasket Types

  • Ring and Full Face

  • Diesel Exhaust Flange

  • Manifold

  • Turbine Crossover

  • Heat Exchanger

  • Nuclear Service

“Gasket Sizes”
standard: 80” x 80”; 60” x 60”
special: 80” x any length

Specifications

  • Item #: 1142

  • Item Name: Pyro Tex Gasket Sheet

  • Temperature: -400 to 1400 ºF, -240 to 760 ºC

  • Pressure: 4500 psi, 310 bar

  • Length: 80 in, 160 in

  • Width: 80 in

  • Nominal Single Sheet Thickness: 0.075 in

  • Compressibility: 34 % (room at 5000 psi)

  • Tensile Along Length: 2200 psi, 15.17 MPa

  • Recovery: 6 % (DIN 28090-2)

Features

  • Eliminates Shipping Pallets: Gasket Sheets Individually Packaged in 3" Cardboard Tubes

  • Takes Physical Abuse

  • Die Cut or Shears to Shape, do NOT use Circle Cutters

  • Surface Nodules Promote Flexibility and Flow into Oxidized Surfaces & Scratches

  • Eliminates Spiral Leak Path of Spiral Wound Gaskets

  • Layering of Sheets Allows for Greater Thicknesses

  • Available in Sizes as Large as 80 in x 160 in Sheets

  • Single Sheet Thickness: Nominal 0.075 in

Benefits

  • Strength of stainless steel, seal-ability of graphite

  • Able to handle temperatures up to 1400 °F (760°)

  • Able to handle pressures up to 4500 PSI (310 BAR)

  • Woven design produces a ‘metallic leaf-spring effect’

  • Flexible enough to be rolled up and shipped in tubes

  • Can be cut by hand with a pair of office shears

Applications

  • Badly Oxidized Flange Surfaces

  • Ring and Full Face

  • Diesel Exhaust Flanges

  • Turbine Cross Over

  • Heat Exchangers

Additional Information

Slade starts with patented yarns reinforced with flattened strips of stainless steel, and totally encapsulated in flexible graphite. Woven into sheets 80 in (2 mtr) x 80 in (2 mtr) x 0.075 in (1.9 mm) and longer lengths.

Pyro-Tex Sheet has the feel of leather, the toughness of stainless steel, and the seal-ability of graphite. Flexible enough to ship in tubes. Individual Graphite Foil Weaving Yarn is Reinforced with Stainless Steel Strips, The Woven Compressed Gasket Sheet is then Rolled into Cardboard Tubes for Shipment.



York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world"s leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch