Heavy Duty Series
Progressing Cavity Pumps
LJ10 Series Open-Hopper PC Pump for Fruits and Vegetables
The LJ10 Series Open Hopper Progressive Cavity Pump is an ideal pumping solution for low-flowable mediums with high solids contents such as vegetables and fruits. Flow rates of 18.8 GPM/ per 100 Revolutions (52 GPM to 84 GPM) at 225 PSI are standard through the range of the series. The Justice Series offers a design of a heavy-duty auger conveyor screw mated to a rotor and stator for the most difficult pumping applications.
The large rectangular feed hopper design easily accommodates your pumping medium while the non-pulsating design of the product produces a low-shear flow that conveys your medium along effortlessly. Solids in suspension of up to 50% are accommodated by the Auger design.
The modular design of the LJ10 Series is a hardened pinned-joint drive assembly with a body available in steel or 316 stainless steel and internal wetted components in either stainless steel or hardened tool steel with hard chrome plating for long-life and durability in abrasive pumping applications.
Rotors and Stators for the LJ10 Series are available in 1, 2, and 3 stages for applications with 75, 150, and 225 PSI discharge pressures with stators available in Buna Nitrile, Viton®, EPDM and Natural Rubber. The standard seal design is a set of packing with a lantern ring and flush connections. Mechanical Seal options are readily available.
LJ10 Series Open Hopper Progressive Cavity Pump - Technical Data
FLOW RATE - 52 - 84 GPM
PRESSURE - 0 - 225 PSI
SEAL OPTIONS - Packing and and Mech. Seal
BASE OPTIONS - Steel and Stainless Steel
INLET/OUTLET - 26" x 12" / 5" NPTF
ROTORS - Tool Steel & Stainless Steel, Chrome Plated
STATORS - Buna/Viton®/EPDM/Rubber
MOTOR OPTIONS - 5, 10, 15, HP
LJ10 Series Open Hopper Progressive Cavity Pump Features