|
The Type F3.15 and ULF3.15 Adjustable Flow Switches trip an electrical relay when flow velocity decreases below a preset trip point. This unique unit doubles as a flow sensor. The pulse output (with frequency proportional to flow velocity) may be fed to a FlowX3 flow monitor/transmitter or batch controller.
|
Type F3.15
|
| Body Materials: |
CPVC, PVDF, 316L Stainless Steel, Brass |
| Rotor: |
ECTFE (Halar®) |
| Shaft & Bearings: |
Ceramic |
| Seals: |
EPDM, Viton® |
| Pipe Sizes: |
1/2"– 24" in two sensor lengths,
L0 or L1. See Installation Fittings |
| Velocity Trip Point: |
0.15 to 1 m/s (0.5 to 3 ft./sec.),
freely adjustable |
|
Type ULF3.15 POM Version
|
| Sensor Body : |
POM |
| Rotor: |
POM |
| Shaft: |
Corepoint®† |
| O-Ring: |
Viton® |
| Connection: |
Inline 1/4" BSP male threaded |
| Flow Trip Point: |
Freely adjustable,
ULF01 Model – 1.5 to 21 l/hr (0.0066 to 0.09 USGPM)
ULF03 Model – 6 to 53 l/hr (0.0264 to 0.23 USGPM) |
† Corepoint® is a steel alloy.
|
Type ULF3.15 ECTFE Version
|
| Sensor Body : |
ECTFE (Halar®) |
| Rotor: |
ECTFE (Halar®) |
| Shaft: |
Sapphire |
| Bearings: |
Sapphire |
| O-Ring: |
Viton® or Kalrez® |
| Connection: |
Inline 1/4" BSP male threaded |
| Flow Trip Point: |
Freely adjustable,
ULF01 Model – 1.5 to 21 l/hr (0.0066 to 0.09 USGPM)
ULF03 Model – 6 to 53 l/hr (0.0264 to 0.23 USGPM) |
 Type F3.15 & ULF3.15 Adjustable Flow Switch Data Page |
|
Back to
Digiflow FlowX3
Back to
Flow Meters
Back to Canadian
Product Line
Back to
UK Product Line
Back to U.S.A.
Product Line
|
