|
The Type F3.80 Oval Gear Flow Sensors are positive displacement flow meters suitable for high viscosity fluids up to 1,000 cP. Accuracy and repeatability is high.
Inside is a transducer and two oval gears oriented at 90 degrees to each other with embedded permanent magnets. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity. This pulse output is normally fed to a FlowX3 flow monitor/transmitter or batch controller. It can also be fed to other brand instruments or PLC’s.
|
Polypropylene Version
|
| Sensor Body: |
Polypropylene |
| Oval Gears : |
ECTFE (Halar®) |
| Shaft: |
Zirconium |
| O-Ring: |
Viton® |
| Connections: |
Inline 1/4" BSP female threaded |
| Flow Ranges: |
F3.81.H Model: 10 to 100 l/h (0.044 to 0.44 gpm)
F3.82.H Model: 25 to 150 l/h (0.11 to 0.66 gpm) |
|
ECTFE Version
|
| Sensor Body: |
ECTFE (Halar®) |
| Oval Gears : |
ECTFE (Halar®) |
| Shaft: |
Zirconium |
| O-Ring: |
Viton® |
| Connections: |
Inline 1/4" BSP female threaded |
| Flow Ranges: |
F3.81.H Model: 10 to 100 l/h (0.044 to 0.44 gpm)
F3.82.H Model: 25 to 150 l/h (0.11 to 0.66 gpm) |
|
Stainless Steel Version
|
| Sensor Body: |
316L SS |
| Oval Gears : |
ECTFE (Halar®) |
| Shaft: |
316L SS |
| O-Ring: |
Viton® |
| Connections: |
Inline 1/4" BSP female threaded |
| Flow Ranges: |
F3.81.H Model: 10 to 100 l/h (0.044 to 0.44 gpm)
F3.82.H Model: 25 to 150 l/h (0.11 to 0.66 gpm) |
 Type F3.80 Oval Gear Flow SensorData Page
|
