|
The Chemline SB Series Back Pressure Valves, Pressure Relief Valves have two functions. As a Back Pressure Valves, installed in-line downstream of a pump, the back pressure below the metering pump is maintained. When installed in the branch of a tee it is a Pressure Relief Valve. The valve stays closed until inlet pressure reaches the set pressure which is adjusted by turning
the spring tensioning bolt. Inlet pressure acts on the Teflon® control diaphragm opening the valve, allowing excess pressure to flow downwards through the orifice.
The SB10/11 Series Back Pressure Valves, Pressure Relief Valves are very sensitive to pressure changes and requires low overpressure to fully open.
Sensitive and Reliable
Designed for Long Life
True Union Ends
|
PVC, PP, PVDF
|
| Series: |
SB10 and SB11 |
| Sizes: |
3/8" – 2" |
| Ends: |
True Union Socket or Threaded
Non Union Socket, Threaded,
Flanged or Butt (Spigot)†, ChemFlareTM |
| Control Diaphragm: |
Teflon® Bonded EPDM |
| Seals: |
EPDM, Viton® |
† PP and PVDF spigot ends have DIN dimensions and will butt fuse directly to Chemline PP and PVDF piping systems.
 SB10/11 Series Data Page
3/8" to 1-1/2" SB Series Installation and Maintenance Manual
2" SB Series Installation and Maintenance Manual
|
