|
The Chemline SB Series Back Pressure/Relief Valve has two functions. As a Back Pressure Valve, installed in-line downstream of a pump, the back pressure below the metering pump is maintained. When installed in the branch of a tee it is a Pressure Relief Valve. The valve stays closed until inlet pressure reaches the set pressure which is adjusted by turning the spring tensioning
bolt. Inlet pressure acts upward against the piston allowing excess pressure to flow upwards through the orifice.
The SB12’s have a built-in check valve function, desirable for dosing applications. They are not so sensitive as to open with every pulsation from a metering pump.
Designed for Long Life
Ideal for Chemical Dosing Systems
Suitable for “Dirty” Fluids
|
PVC, PP, PVDF
|
| Series: |
SB12 |
| Sizes: |
3/8" – 4" |
| Ends: |
True Union Socket or Threaded
Non Union Socket, Threaded,
Flanged or Butt (Spigot)†, ChemFlareTM |
| Control Diaphragm: |
Teflon® Bonded EPDM |
| Seals: |
EPDM, Viton® |
† PP and PVDF spigot ends have DIN dimensions and will butt fuse directly to Chemline PP and PVDF piping systems.
 SB12 Series Data Page
3/8" to 1-1/2" SB Series Installation and Maintenance Manual
2" to 4" SB Series Installation and Maintenance Manual
|
