Temperature Sensors From Enercorp Instruments

Space Air Temperature Sensors

Space Air Temperature Sensors with a New High Ventilation Design has ventilation slots 50% larger than some competitors allowing more air to flow past the sensor providing faster response and more accurate readings.

<< Learn More >>

Temperature Sensors

Large Format Space Air Temperature Sensors

Large Format Space Air Temperature Sensor high ventilation design has large ventilation slots allowing maximum air to flow past the sensor for fast response and accurate readings. Our new thin film sensor has faster response than the older wire wound elements.

<< Learn More >>

Temperature Sensors

Duct Air Temperature Sensors

Duct Air Temperature Sensors are mounted using PC board technology to eliminate strain on the sensor leads, increasing reliability. This assembly is potted in heat transfer compound to provide rapid response and protection from vibration.

<< Learn More >>

Temperature Sensors

Immersion Temperature Sensors

Immersion Temperature Sensors/Probes are used to measure the temperature of fluids or gases in pipes.

We spring load these Immersion Temperature Sensors/Probes to provide a good thermal contact with the base of the mating thermowell for fast and accurate measurements.

<< Learn More >>

Temperature Sensors

Pipe Sensor With LED Readout

The LED option adds a high intensity red LED digital indicator to our Pipe Sensor for displaying local temperatures. This can be very useful in retrofit work when glass thermometer wells are re-used for HVAC sensors. Previously it was either expensive or impractical to shut down a section of the physical plant while an extra well was welded in.

<< Learn More >>

Temperature Sensors

Copper Averaging Probe

Inside the Copper Averaging Probe numerous sensors are encapsulated at equal distances along the length of the sheath. The complete assembly acts as a single temperature sensor and any temperature change is averaged across the sensors. The Copper Averaging Probe can easily be bent to fit any size duct.

<< Learn More >>

Temperature Sensors

Flex-Cable Averaging Sensor

Our Flex-Cable Averaging Sensor is constructed using CSA rated FT6 plenum cable. Numerous sensors are encapsulated in sheaths at equal distances along the length of the cable. The complete assembly acts as a single temperature sensor and any temperature change is averaged across the sensors.

<< Learn More >>

Temperature Sensors

Outdoor Weather Proof Air Temperature Sensors

Our Outdoor Weather Proof Air Temperature Sensors contain a rugged RTD sensor for high accuracy and long term stability for temperatures between -50°C to +80°C. A thermistor version for ease of connection to certain control systems is also available. This assembly's construction consists of a waterproof seal, a weather resistant shield and non-corrosive material to withstand all weather conditions.

<< Learn More >>

Temperature Sensors

Plate Air Temperature Sensors

Our Plate Air Temperature Sensors are ideal for public or high traffic areas where a conventional space sensor could be easily damaged. The flush mounting eliminates accidental damage from knocks by machinery or people. The plain cover makes it unattractive to vandals since its function is not obvious.

<< Learn More >>

Temperature Sensors

Flue Gas Temperature Transmitters

Our Flue Gas Temperature Transmitters are constructed using the same technique we use in the industrial sensors we supply to power plants and heavy industries. The RTD or thermocouple is embedded in magnesium oxide, packed and sealed within a stainless steel sheath.

<< Learn More >>

Temperature Sensors

Strap-On Temperature Sensors

Strap-On Temperature Sensors have been engineered to ensure long life and rapid response. The sensor is mounted using PC board technology to eliminate strain on the sensor leads, increasing reliability.

<< Learn More >>

Temperature Sensors

Brass Plate Temperature Sensors

When you need to measure the temperature of a pipe's contents and no thermowell is available this is the solution. Simply add a little heat transfer paste to the smooth side of the brass plate and fasten the assembly to the pipe with a hose clamp.

<< Learn More >>

Temperature Sensors

Soil Temperature Sensors

Soil Temperature Sensors have been engineered to ensure long life, rapid response and to seal against moisture.

The sensor is mounted using PC board technology to eliminate strain on the sensor leads, increasing reliability. This assembly is potted in heat transfer compound to provide rapid response and protection from vibration.

<< Learn More >>

 

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


ENERCORP INSTRUMENTS LIMITED

About Enercorp

Enercorp Instruments Ltd is a Manufacturer of Temperature, Pressure & Humidity Instrumentation. Used for Industrial, Food Processing, Climate Monitoring & Energy Management Applications.

Sitemap

Enercorp Products

Our products include temperature, pressure, humidity & climate instruments for sensing, controlling, recording and indicating; as well as wind speed & direction systems, RTD elements, smokehouse probes & custom built RTD, thermocouple and thermistor temperature sensors, temperature transmitters/transducers, thermowells, moisture meters, signal conditioners, power supplies, air quality & gas monitors..

Contact Enercorp

  • Toll Free:
    1-800-363-2677
  • Telephone:
    416-231-5335
  • Fax:
    416-231-7662
  • Email and Website:
    sales@enercorp.com www.enercorp.com
  • Head Office:
    25 Shorncliffe Road,
    Toronto, ON
    M9B 3S4 Canada