Split Core Current Sensors From Enercorp Instruments ltd

Easy to Install Status Indication

Split Core, Current Sensors, Model SC225Split Core Current Sensors Model SC225 is our easiest to install fixed setpoint current operated solid state status sensor for status indication.

The one unit is pre-set to switch at 1.5 amps and will switch either AC or DC loads. This flexible design eliminates installation problems. It is not possible to incorrectly set the trip point or install a DC unit when an AC load should be switched.

Split Core Current Sensors Model SC225 design means that retrofit installations are simplified since power does not have to be shut off and connections do not have to be broken.

Split Core Current Sensors Model SC225 monitors from 1 to 250 Amperes and switches up to 135 volts AC or DC. Internal circuits are totally powered by induction from the line being monitored.

Split Core Current Sensors Model SC225 design enhancements offer zero off-state leakage in the solid state relay output. The contact is not polarity sensitive, simplifying wiring.

Data Sheet | Other Current Products



Split Core Current Sensors Model SC225
Copyright © 2008 Enercorp Instruments Ltd. All rights reserved.