|
|
FirstClass Wind Transmitter
The FirstClass Wind Transmitter is designed to evaluate the location and capacity of future wind power systems. The FirstClass Wind Transmitter measures the horizontal component of wind speed. The measured value is available as a digital signal at the output.
|
|
Low Cost Stainless Steel Pressure Transducer
The PX61 Stainless Steel Pressure Transmitter features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.
|
|
|
Ultrasonic Anemometer
The Ultrasonic Anemometer 2D detects the horizontal components of wind speed and direction in two dimensions as well as the virtual temperature.
|
|
|
Drying, Cooking and Curing Controllers
The EIL3000 Drying and Curing Batch Control System controls the temperature and humidity during a batch drying, curing or cooking process. The well thought out display makes it easy for the operator to know the operating conditions at all times.
|
|
|
SMD Platinum-chip RTD Temperature Sensor
100 ohm, and 1000 ohm DIN standard RTD elements are now available in surface mount design for under $1.50. These size 1206 and 805 SMD Surface Mount RTD Temperature Sensor chips have accuracies of 1/3 degree from -50 to +130°C.
|
|
|
Paperless Recorder
No ink cartridges or paper are required with our new PR20 Paperless Chart Recorder. The bright LCD can represent a conventional paper chart or display graphical or digital trace representations.
|
|
|
Wet/Dry Bulb to rH Transducer
The HT-WD-420 provides inexpensive yet very accurate Relative Humidity Measurement over a wide temperature range. It connects to two RTD sensors in a wet/dry bulb arrangement and outputs 4-20mA proportional to 0-100% rH.
|
|
|
Wind Speed Direction Transmitters
Our Compact Wind Speed Transmitters have the perfect price performance ratio for most commercial and industrial applications.
|
|
|
Simple Temperature Controller
The ETTR is a Programmable Temperature Relay with the ability to act as an ON/OFF temperature controller. The device is capable of fully stand alone operation, but may be monitored and programmed with the custom software and a serial RS232 interface.
|
