HAUG Static Control Products
HAUG High Voltage Power Pack Multitstat Plus
The high-voltage power pack Multitstat Plus with its long permissible connected length and extended monitoring facilities is a high-performance unit. The Multistat Plus is particularly suited to systems with multiple ionizing bars. The extended functions of the Multistat Plus allow improved monitoring of the ionizing system set-up with this unit.
The unit has 6 individually monitored high-voltage sockets. Any overload is indicated by means of a warning lamp and a signal at the signalling socket.
All HAUG ionizing units can be connected using the X-2000 high-voltage connector system. The most appropriate HAUG ionizing units can therefore be used depending on the fitting dimensions, the required output and the application conditions.
The display indicates the high-voltage or currents at the 6 high-voltage connections. The currents are output one after another in a fixed sequence. This allows good monitoring of the ionizing units connected to the HV sockets.
|Protection type||IP 54|
|Supply voltage||115 VAC / 230 VAC (50 – 60 Hz)|
|Power consumption||approx. 200 VA|
|Output-voltage||approx. 6 – 8 kVAC|
|Output short-circuit current
|(lk) ≤ 4 mA
(permissible operating range)
|Load rating of signalling contacts:||24 VAC / 35 VDC max. 50mA|
|Connectable length||max. 6 x 10m (ionizing unit incl. HV-cable)|
|Operating temperature||+5 °C to +45 °C|
|Storage/transport temperature||-15 °C to +60 °C|
|Weight||approx. 11 kg|
|Mains cable||2.6 m; fixed to the device|
Subject to technical changes!
|Signalling cable K1
incl. round plug
|5 m||Order-No.: 06.8941.000|
|10 m||Order-No.: 06.8941.001|
|20 m||Order-No.: 06.8941.002|
|Round plug||Order-No.: X-0616|
|Angled plug||Order-No.: X-5718|
HAUG Static Control Products And Solutions For Industry