HAUG Ionization Systems Product Line


Air Blow Off Systems

Mini Air Gate LS PLE

Mini Air Gate LS PLE

Mini air gate LS PLE – the mini unit with the maximum effect. The midget among the HAUG air gates, it nevertheless offers top effectiveness combined with the smallest dimensions. Two rigidly installed ionizing bars with circular jet nozzles guarantees the best performance. The handy unit is particularly suitable for use with smaller machines.
<< Learn More >>

Duo Air Gate LS GK

Duo Air Gate LS GK

The Duo air gate LS GK, together with its simultaneous dusting of non-conductive surfaces, is a highly developed and efficient aid in the removal of electrostatic charges.The device reduces negative impacts on production so that quality losses, as well as high numbers of rejects, can be almost completely eliminated. This reduces production costs considerably.
<< Learn More >>

Uno Air Gate KL GK

Uno Air Gate KL GK

The uno air gate KL GK is a tested and proven unit which is used in production to eliminate electrostatic charges, dust and associated interferences in the best possible way. The exchangeable precision nozzles which are arranged offset in two rows shape the air stream into a defined flat jet. Once neutralized, the particles are mechanically removed by means of the air stream.
<< Learn More >>

Compact Airlock KM GK

Compact Airlock KM GK

The Compact Airlock KM GK is operated in the medium pressure range. This technique reduces operating costs significantly, without sacrificing effectiveness. In combination with a HAUG Ionizing bar a good surface for subsequent coating of plastic parts or other pre-treatment processes can archived.
<< Learn More >>

Air Knife AK GK

Air Knife AK GK

The Air Knife AK GK belongs to the group of air gates. As the name already indicates, these are ionizers which are supported by air flows. The effectiveness of the Air Knife can be explained by the special design of the air discharge nozzle which creates the so-called “coanda effect”. << Learn More >>

needle ionizer

Needle Ionizer NI

The Needle ionizer NI generates positive and negative ions. The units assist the air stream and is intended to eliminate electrostatic charges and contamination (e.g. dust) from small and tiny vessels.
<< Learn More >>

ring ionizer

Ring Ionizer EI RIF

Extensive trials have confirmed that the ring ionizing unit EI RIF is the special piece of equipment for the elimination of electrostatic charges during granular product conveying (Ring ionizer in feed pipes). Even extremely high static charge potentials are neutralized reliably and highly effectively. A steady, problem-free and efficient production process is therefore guaranteed.
<< Learn More >>

ring ionizer

Ring Ionizer RI 20 / 32 / 65

The HAUG ring ionizer is a highly effective production aid for the discharging and cleaning of surfaces – in particular of non-conductive materials. Beside the hand-held unit, other versions are available for installatin into plants and machinery (without air gun).
<< Learn More >>

ionizing air gun

Ionizing Air Gun "Lady Gun" RI LG

The HAUG RI LG “Lady Gun” ionizing air gun has its name with good reason: this ionizing device, with its service-friendly handling, is a peerless innovation in the field of elimination of dust and charges. Heavy-duty users and women greatly appreciate is lightweight.
<< Learn More >>

accu jet

Accu Jet

The Accu Jet is an outstanding innovation by the company HAUG Ionization Systems: The Accu Jet represents an all-in ionization system...
<< Learn More >>

ion air blower

Low Pressure Ion Air Blower Ion-Air One IR1

The Ion-Air one IR1 low-pressure blower is a versatile device for the elimination of electrostatic charges on non-conductive material. An airflow, enriched with either positive or negative ions, neutralizes interfering surface charges and removes – depending on the working distance – debris from the surface.The Ion-Air one does not need compressed air. Room air is drwan in, filtered, accelerated by the fan, and then simultaneously ionized and blown out again.
<< Learn More >>

ion air blower

Ion Air Blower IB

HAUG’s Ion-Air blower IB is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. The air flow hence becomes conductive and is able to eliminate electrostatic surface charges on non-conductive material.
<< Learn More >>

ion air blower

Ion Air Blower Ion-Air Mini

The HAUG air ionization blower Ion-Air mini is a small, lightweight unit which is operated at a voltage of 24VDC. The Ion-Air mini is supplied with a clamp which allows the unit to be fixed very easily in the desired position, for example at a table edge. When the clamp is removed, the Ion-Air mini can be used a handy table-top unit.
<< Learn More >>

mini jet ionizer

Mini-Jet Ionizer MJ I

With its air assistance, the HAUG Mini-Jet ionizer MJ I neutralizes electrostatic surface charges highly effectively. It comes into its own in space-critical or complex installation situations, in particular. The air assistance allows positive and negative ions to be conveyed over larger distances. This ion flow neutralizes surface charges on workpieces.
<< Learn More >>

mini jet ionizer

Mini-Jet Ionizer MJ II

With its air assistance, the HAUG Mini-Jet ionizer MJ II neutralizes electrostatic surface charges highly effectively.It comes into its own in space-critical or complex installation situations, in particular. The air assistance allows positive and negative ions to be conveyed over larger distances. This ion flow neutralizes surface charges on workpieces.
<< Learn More >>

delta blower

Delta Blower DA TR

Delta blower DA TR – small design – great effectiveness! Its compact design makes the Delta blower DA TR a very versatile device. Its wide, cone-shaped air jet blows accross the ionizing pins which generate a vigorous ionic current with positive and negative ions.
<< Learn More >>

mobile circle cleaner

Mobile Circle Cleaner

The Mobile Circle Cleaner is a hand-held ionizing unit. It eliminates electrostatic charges and adhering dirt in one work process. The Mobile Circle Cleaner is particularly effective on textured surfaces.
<< Learn More >>

circle cleaner

Circle Cleaner CC 01

The compact surface cleaning unit Circle Cleaner CC 01 allows electrostatic charges to be reduced or eliminated by means of a rotating compressed air nozzles.A special variable-speed cleaning nozzle with pulsating air flow and twin nozzle with a unique working principle ensures, depending on the operating distance, that disturbing surface charges and contamination are eliminated.
<< Learn More >>

web cleaner

Web Cleaner 1 WXC 1

These Web Cleaner 1 WXC 1 are used for removing dust from surfaces. The functional modules consist of ionization, air jet and extraction. These modules are coordinated effectively within a closed system.
<< Learn More >>

er
web clean

Web Cleaner 2 WXC 2

The Web Cleaner 2 WXC 2 is used for contact-free cleaning with simultaneous extraction of visible dust and smaller particles. Cleaning and elimination of electrostatic charges from material webs in the same process by using ionized compressed air. The integrated extractor ensures an optimum and residue-free degree of surface cleaning.
<< Learn More >>

surface cleaner

HAUG Surface Cleaner

The HAUG Surface Cleaner is intended for the contact-free removal and cleaning of electrostatic charges and particles from, for example, plastic injection mouldings, deep-drawn parts and film webs. The combination of two (round) ionizing bars and pulsed compressed air from several rotating cleaning nozzles ensures a consistent, efficient cleaning result.
<< Learn More >>

 

Charging Generators And Devices

Charging Device ANT

Charging Device ANT

The Anti-neck-in-triode ANT guarantees the optimal exploitation of the rim of the fusing field and simultaneously serves to suppress the well-known "neck-in effect" in the extrusion of film.

<< Learn More >>
Charging Device ALW

Charging Device ALW

The resistance-coupled charging electrode ALW was created for use with the charging generator AGW. By limiting the current using resistors, the generation of hard sparks can be reliably prevented, thus significantly reducing possible damage to or impairment of electronic machine controls.

<< Learn More >>
Charging Device ALS

Charging Device ALS

The HAUG charging bar ALS is suitable for most applications where material webs are to be fixed relative to each other. The charging bar ALS can be supplied using a HAUG AG-series charging generator. These are optionally available with positive or negatice polarity. The voltage of the charging generator can be steplessly adjusted.

<< Learn More >>
Charging Generator AG SL

Charging Generator AG SL

The output of the low-priced charging generator AG SL is set by modifying the distance of the electrodes. The AG SL has one high-voltage connection (DC). The output voltage is displayed by means of an analog measuring instrument.

<< Learn More >>
Charging Generator AG 25

Charging Generator AG 25

The charging generator AG 25 is equipped with one high-voltage connection (DC). The electronic voltage adjustment is stepless, and there is a choice of analog or digital display integrated into the unit for the output voltage. This unit has been tested and proven thousands of times. It is suitable for all common applications.

<< Learn More >>
Charging Generator AG 30

Charging Generator AG 30

The AG 30 charging generator is a high-voltage unit that is used together with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be mounted at 10 to 30 mm above the material to be charged, exactly opposite the counter-electrode. When an earthed counter-electrode is used, it must be in contact with the material to be charged.

<< Learn More >>
Charging Generator AG 35

Charging Generator AG 35

Beside its two high-voltage connections for the charging section, the charging generator AG 35 also offers a discharge section with four high-voltage connections and electronic fault and performance monitor. The electronic voltage adjustment is stepless, and there is an analog voltage output display integrated into the unit.

<< Learn More >>
Charging Generator AG 60

Charging Generator AG 60

The charging generator AG 60 is a high-voltage generator which is used in combination with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be attached at a distance of 10–20 mm above the material to be charged, exactly opposite the counter-electrode.

<< Learn More >>
Charging Generator AG 150

Charging Generator AG 150

The HAUG charging bar ALS is suitable for most applications where material webs are to be fixed to each other. The supply to the charging bar ALS is from the charging generator AG 150 which is available with either positive or negative polarity. The direct voltage output of the charging generator can be set steplessly, and a remote option is also available.

<< Learn More >>
Charging Generator AG AGW / AGW PUR Profibus

Charging Generator AG AGW / AGW PUR Profibus

HAUG charging systems are intended for the contact-free application of electrostatic charges. These systems are used wherever different materials need to be fixed to one another electrostatically. This electrostatic fixation is intended to support downstream processes such as the film overlap in packaging machines. At least one of these materials must be insulating.

<< Learn More >>
Charging Generator Tristat TR 15 / TR 25

Charging Generator Tristat TR 15 / TR 25

The HAUG charging generators Tristat TR 15 / TR 25 are high-voltage generators developed specifically for the supply of HAUG charging triodes (types ALT, ALM and ANT). The charging triode is placed at a distance of approx. 10–20 mm above the material to be charged, directly opposite the counter-eletrode. The earthed counter-electrode must be in contact with the material to be charged.

<< Learn More >>
Charging Generator Tristat TR 30

Charging Generator Tristat TR 30

The Tristat TR 30 charging generator is a high-voltage generator which was specially developed to feed type ALM triodes. The current threshold of this device can be adjusted. The output voltage can also be controlled. An analog display shows the current and voltage. The device has two high-voltage terminals for the connection of ALM, ALT or ANT charging triodes.

<< Learn More >>
Charging Generator Tristat TR 150

Charging Generator Tristat TR 150

HAUG charging triodes are characterized by a very homogenous field around the charging pins. Due to the special geometry of the charging triode, no spark-over to the counter-electrode can occur. The charging triode can therefore be mounted at a distance of approx. 10–30 mm from the material to be charged. The supply to the charging triodes is from the charging generator TR 150 which is available with either positive or negative polarity.

<< Learn More >>
Charging Generator HW 30

Charging Generator HW 30

The HW 30 charging generator is a high-voltage unit that is used together with the resistance-coupled HAUG charging electrode ALW and a suitable counter-electrode. The charging electrode must be mounted at 10 to 30 mm above the material to be charged, exactly opposite the counter-electrode.

<< Learn More >>
Charging Generator HW 150

Charging Generator HW 150

The resistance-coupled charging electrode ALW is particularly recommended for applications where an increased risk of sparking exists which could lead to damage to high-grade surfaces or electronic components. The supply to the resistance-coupled charging electrode ALW is from charging generator HW 150, which is available with either positive negative polarity. The direct voltage output of the charging generator can be set steplessly, and a remote option is also available.

<< Learn More >>

 

DC Line

Power Pack EN 1 DC

Power Pack EN 1 DC

In combination with the connected direct voltage ionizing units, the EN 1 DC provides a high discharging output for the neutralization of electrostatic charges. It therefore ensures reliable electrostatic neutralization even in fast running processing.


<< Learn More >>
Ionizing Unit DC Jet

Ionizing Unit DC Jet

The DC Jet is an ultra-compact air-assisted ionizing unit. The direct voltage technology employed ensures that the DC Jet is still powerful despite its small dimensions. The air assistance increases the reach of the ions and also allows small particles to be blown off surfaces. The ionizing head of the DC Jet is attached to a modular hose.


<< Learn More >>
Ionizing unit EI DC

Ionizing unit EI DC

The Ionizing unit EI DC is an excellent choice for use in fast running processes or for neutralizing high electrostatic charges. Due to the direct voltage technology employed, it provides a high discharging output. Its GRP section makes the EI DC torsionally extremely stiff and allows the production of large bar lengths.


<< Learn More >>

 

EX Line

Power Pack EN 92 Ex

Power Pack EN 92 Ex

Power pack EN 92 Ex is suitable for direct use in areas with potentially explosive atmospheres (zones 1 or 2).The units comply with the European ATEX directives. All high-voltage components are accommodated in a flameproof housing.
<< Learn More >>

Ionizing Bar EI Ex T

Ionizing Bar EI Ex T

The design of the ionizing bar EI Ex T complies with the European ATEX directivities. In combination with the power pack EN 92 Ex or Multistat Ex, it is suitable for use in manufacturing locations with potentially explosive atmospheres resulting from gases of explosion group IIA, temperature classes T4 to T6. Units for areas with potentially explosive atmospheres (ex zone).
<< Learn More >>

Ring Ionizers RI EX M/V

Ring Ionizers RI EX M/V

The ring ionizers RI EX M/V are supplied as a hand-held unit (RI Ex M/V) with compressed air gun, or for fixed installation (RI Ex O). Due to their compressed-air assistance, these units are ideally suited to blowing off workpiece surfaces using ionized air. At the same time, electric charges on non-conductive materials can be eliminated in one process.
<< Learn More >>

 

Power Supplies

Power Pack EN CL

The HAUG Compact-Line offers a package of ionizing technique at a reasonable price. Small and easy to handle, the EN CL power pack has a modern layout and is highly efficient. This power pack is equipped with a high-voltage connector (connectable length 5 m). The EI PRQ ionizing bar perfectly complements the power pack EN CL.
<< Learn More <<

Power Pack EN 8 LC

The EN 8 LC power pack represents the state of the art. The monitoring which is integrated in the secondary area indicates that the partial discharge inception voltage (= start of effect of ionization units / ill.1) is too low by making the monitoring LED blink. The compact printed circuit board technology ensures reliability and ease of maintenance. The device has four gas-tight high-voltage connections and has been manufactured in accordance with protection type IP 54, protection class I as per VDE.
<< Learn More <<

Power Pack EN 70

The high-voltage power pack EN 70 / EN 70 LC / EN 70 RLC is a powerful and hardwearing unit. Its design fulfills all electrical engineering requirements. The EN 70 / EN 70 LC / EN 70 RLC power pack is used in fast-running machines in combination with tandem ionizing bars.
<< Learn More <<

Power Pack EN SL

With his modular electronic components the EN SL power pack guarantees a service-friendly power supply.The EN SL power pack comes with two high-voltage connections and was designed to provide HAUG ionizing systems with the required voltage.
<< Learn More <<

Power Pack NF 45

The combination of power pack NF 45 and ionizing bar NFA was developed specifically for use on fast running machines. The power pack NF 45automatically adjusts the discharging frequency (400 – 800 Hz) to the connected bar length. The higher frequency of the power pack NF 45ensures a high decoupled current and therefore fast, even discharge of the material. Still, the ionizing bar NFA is absolutely safe to touch.
<< Learn More <<

Power Pack Multistat

The Multistat power pack in combination with HAUG ionizing units is intended for the removal of electrostatic charges. The mains voltage is transformed by the Multistat to an output voltage of 7 – 8 kVAC for the operation of HAUG ionizing units.
<< Learn More <<

Power Pack Multistat Plus

The high-voltage power pack Multitstat Plus with its long permissible connected length and extended monitoring facilities is a high-performance unit. The Multistat Plus is particularly suited to systems with multiple ionizing bars. The extended functions of the Multistat Plus allow improved monitoring of the ionizing system set-up with this unit.
<< Learn More <<

Power Pack EN 9 Sine

The discharging power pack EN 9 Sine supplies energy to HAUG ionizing units. A functional monitoring facility reports impermissible operating states in the ionizing system such as short circuit and spark formation or thermal overload. The EN 9 Sine can be pulsed and supplies a monitoring signal of the output high voltage.
<< Learn More <<

 

Static Elimination (Ionizing) Bars

EI SL Ionizing Bar

EI SL Ionizing Bar

Thanks to its state-of-the-art ionization technology, the HAUG EI SL ionizing bar is setting new standards: Ensuring an optimal neutralizing effect, it eliminates electrostatic charges during roll, sheet and web processing.
<< Learn More <<

Static Elimination Bar EI RN

Static Elimination Bar EI RN - Standard Performance

The HAUG EI RN ionizing bar is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively – even at high operating speeds.
<< Learn More <<

Static Elimination Bar EI VC

Static Elimination Bar EI VC - Clean Room Certified

The HAUG ionizing bar EI VC reliably eliminates electrostatic charges in clean rooms. It can be used in both directly for the discharge of objects or for enriching laminar air flows with positive and negative ions.
<< Learn More <<

Static Elimination Bar EI VS

Static Elimination Bar EI VS - High Performance

The HAUG EI VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is considerably enhanced.
<< Learn More <<

EI VS Nut Bar With A T Slot For Mounting

EI VS Nut Bar With A T Slot For Mounting

The version EI VS Nut is equipped with a continuous T-slot. This allows the bar to be mounted without additional brackets with minimum mounting effort und greatest possible flexibility in the choice of fastening points.
<< Learn More <<

Static Elinination Bar EI HRN

Static Elinination Bar EI HRN - High Temperature

The HAUG ionizing bar EI HRN is intended for applications in temperatures up to +130°C. It is a powerful ionizer symmetrically generating positive and negative ions by means of alternating voltage.
<< Learn More <<

Static Elimination Bar EI PS

Static Elimination Bar EI PS - Small Profile

The HAUG ionizing bar EI PS is a mini high-performance ionizer. Thanks to the “power technolgy” developed by HAUG, its operational effectiveness is clearly above other comparable ionizing bars. A particular advantage lies in the symmetry of the emitted ions: positive and negative particles approach the load carrier absolutely uniformly to give contact-free neutralization. They ensure reliable elimination of “spot charges”.
<< Learn More <<

Static Elimination Bar EI W

Static Elimination Bar EI W Special Performance

The ionizing bar EI W is a new development combining the highest output with excellent mechanical stability. At the same time, the modular design of the system ensures a high degree of flexibility and serviceability.
<< Learn More <<

EI Form Segmental Ionizer

EI Form Segmental Ionizer

The HAUG segmental ionizer EI Form has proven its value in the removal of electrostatic charges in the packaging industry and in the medical technology. Production-interfering surface charges can be removed reliably and effectively with the EI Form.
<< Learn More <<

OPI One Point Ionizer

OPI One Point Ionizer

The discharging power pack EN 9 Sine supplies energy to HAUG ionizing units. A functional monitoring facility reports impermissible operating states in the ionizing system such as short circuit and spark formation or thermal overload. The EN 9 Sine can be pulsed and supplies a monitoring signal of the output high voltage.
<< Learn More <<

EI RE Ring Electrode

EI RE Ring Electrode

With their extensive and fully developed technology, ring electrodes EI RE provide a wide-ranging neutralization effect. The plastic processsing industry recognize them as an essential production aid with innumerable applications. The radial and central alignment of the electrode as well as a symmetrical choice of ions, together with large spacious punchthrough guarantee maximum efficiency and performance.
<< Learn More <<

BI Brush Ionizer

BI Brush Ionizer

The brush ionizer (BI) is a passive ionization bar and reduces static charges with very high field strengths on material webs – preferably case in combination with an active ionization system.
<< Learn More <<

 

Static Test And Measuring Meters

Static Meter I

Static Meter I

The Static Meter I electrofieldmeter is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volt. It perfectly combines easy operation with accurate measuring technique.
<< Learn More <<

Statometer II Field Intensity Meter

Statometer II Field Intensity Meter

The field intensity meter Statometer II is either available with analog or digital display. It is intended for the measurement of electrostatic charges, fields and potentials. This convenient measuring unit is a precision instrument which is suitable for use both in the laboratory and directly at the machine.
<< Learn More <<

Statometer III Field Intensity Meter

Statometer III Field Intensity Meter

The HAUG field intensity meter Statometer III is a consistent further development of the previous field intensity meter Statometer II. It is intended for the measurement of electrostatic and slow alternating fields.
<< Learn More <<

Static Control Field Intensity Meter

Static Control Field Intensity Meter

The field intensity meter Static Control is a reasonably priced and convenient measuring instrument. Using a latching On/Off soft key and two additional soft keys for the measuring ranges 0–100 and 0–1000 kV/m, the Static Control is very simple to operate.
<< Learn More <<

HSM 1 High Voltage Meter

HSM 1 High Voltage Meter

The high-voltage meter HSM 1 is intended to measure AC voltages of up to 10 kVAC on HAUG power packs (A). This meter is equipped with an additional high-voltage socket for connection to an ionizing unit. Thus the power pack and ionizing unit can be tested and their voltage measured during operation.
<< Learn More <<

Digital Static Control Meter

Digital Static Control Meter

The Digital Static Control makes measuring electrostatic charges easy and secure. The meter has a wide measurement range of 0 - 2000 kV/m. The operation is done with a single button.
<< Learn More <<

HSM LED

HSM LED

With the HSM LED it’s possible to install an optical monitoring of the ionization system at a well observable point.
<< Learn More <<

Combicheck High Voltage Test Meter

Combicheck High Voltage Test Meter

Performance testing of power packs and ionizing units (Combicheck). The high-voltage test unit Combicheck is a performance testing unit for HAUG power packs and HAUG ionizing units.
<< Learn More <<

Powercheck High Voltage Test Meter

Powercheck High Voltage Test Meter

The high-voltage test unit Powercheck is a performance testing unit for HAUG power packs.
<< Learn More <<

Multicheck High Voltage Test Meter

Multicheck High Voltage Test Meter

The high-voltage test unit Multicheck is a performance testing unit for HAUG ionizing units.
<< Learn More <<

PZ 3 Perforation Counter

PZ 3 Perforation Counter

The PZ 3 perforation counter is mainly applied in the manufacturing of plastic bags. The contactless detection of perforations allows the number of bags/batches to be determined and indicates when the material rolls need to be changed.
<< Learn More <<

 


HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.

Sitemap

Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Enail Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7