Static Eliminator Bar EI-RN (Ionizing Bar) From Haug North America

Static Eliminator Bar, EI-RN, Ionizing Bar, Haug, North AmericaThe HAUG EI RN ionizing bar is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively – even at high operating speeds.

The coaxial high-voltage plug-and-socket connection of the HAUG systemX-2000 offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.

The round construction of the EI RN ionizing bar permits the exact axial adjustment in the direction of travel of the material. The ionizing bar is safe to touch. Special wear-resistant electrodes guarantee long service life.

Further Bar Types Are Available

  • EI RNE as EI RN, but with high-voltage connection at the end of the bar for series connection of ionizing units.
  • EI RA without HV-cable, suitable for connection of a flexible, separate high-voltage cable (type VK-Norm, VK-ATL a.o.)
  • EI RAE, as EI RA but with high-voltage connection at the end of the bar for series connection of ionizing units.


HAUG ionizing bars are used with machines in the packaging, film, printing and textile industries, as well as for many other industrial applications. It is recommended that two ionizing bars be installed above and below the material web.

The ionizing bar EI RN is suitable for feed speeds ≤ 100 m/min.

Technical Data

Types EI RN
inseparable HV-cable,
attached permanently
to the bar
Order-No.: 03.8005.000
HV-cable Order-No.: 06.0210.000
detachable HV-cable
for series connection
of ionizing units
Order-No.: 03.8007.000
for connection of
a highly flexible,
detachable HV-connection cable
Order-No.: 03.8006.000
VK-Norm 21
VK-Norm 22
VK-Norm 23
VK-Norm 24
Order-No.: 05.8517.000
Order-No.: 02.8522.000
Order-No.: 05.8519.000
Order-No.: 05.8518.000
as EI RA, for series
connection of ionizing units
Order-No.: 03.8008.000
Diameter 18 mm /20 mm
Length from 150 to 4.500 mm lieferbar.
Other lengths on request.
Operating temperature +5°C to +45°C
Storage/transport temperature -15°C to +60°C
Optimum effective distance 20 – 30 mm
Effective length Bar length - 100 mm
Smallest bending radius (cable) R 50

Subject to technical changes!

Technical illustration:

Effective field: 20 - 30 mm = optimum effective distance
Static Eliminator Bar, EI-RN, Ionizing Bar,Haug,North,America
Min. bending radius R50

Cable length ± 50 (customer specification), Bar length ± 5 (customer specification)
Static Eliminator Bar, EI-RN, Ionizing Bar,Haug,North,America
Effective length = bar length - 100 mm


Bar holder ”Klick Zack” Order-No.: 10.0004.000
Bar holder, bloc, half open Order-No.: 10.0301.000
Bar holder Order-No.: 10.0227.000
Clamping holder, 2 parts Order-No.: 10.0268.000
Angle, large Order-No.: X-0404

Suitable Power Packs

Connectable lengths
(ionizing unit incl.
high-voltage cable)
EN SL max. 5 m
EN SL LC / EN SL RLC max. 10 m
EN 8 / EN 8 LC max. 18 m
Multistat max. 18 m
EN 70 / EN 70 LC max. 2 x 18 m



HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.


Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Enail Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7