HAUG Charging Generator AG 60


HAUG, Charging Systems, Charging Generator AGW/AGW PUR Profibus, Contact-Free Application, Electrostatic ChargesThe charging generator AG 60 is a high-voltage generator which is used in combination with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be attached at a distance of 10–20 mm above the material to be charged, exactly opposite the counter-electrode.

Where a grounded counter-electrode is used, this counter-electrode must make contact with the material to be charged. In order to achieve a continuous, controlled charge, we strongly recommend that before charging the materials to be fixed to one another be discharged using a suitable HAUG ionization system.

HAUG-Charging Systems

HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.

Special Features and Advantages

The charging generator AG 60 generates an adjustable high voltage of up to 40 kVDC. The unit is available with positive and negative polarity. The voltage and the actual current are indicated on the integrated measuring instruments. The high voltage and the current threshold can be set using two separate potentiometers. If the actual current exceeds the set value, an error message is triggered and the high voltage is switched off. The charging section of the charging generator AG 60 can be pulsed externally. The discharging section allows a signaling device to be controlled using the integrated signaling socket.

Applications

HAUG charging systems can be used, among others, in the following applications:

  • for fixing and positioning films and foils, paper and cardboard, e.g. on steel sheets, glass panels, wood panels or similar;

  • for fixing films and foils on packaging machines / film welding machines;

  • for fixing films and foils on turrent film winders, for fixing the wound film against telescoping and glue-less commencement of the film winding process on cardboard tubes.

Technical Data

Types AG 60 230 V positive
115 V positive
Order-No.: 09.7660.300
Order-No.: 09.7661.300
AG 60 230 V negative
115 V negative
Order-No.: 09.7662.300
Order-No.: 09.7663.300
Dimensions 390 x 280 x 210 mm
Protection Type IP 54
Protection class I
Supply voltage 115 VAC / 230 VAC (50 – 60 Hz)
HV-terminals
charging
discharging

2
4
Power consumption approx. 140 VA
Output voltage
charging
discharging

approx. 40 kVDC
approx. 7–8 kVAC
Short-circuit output current
charging
discharging

(lk) ≤ 4,5 mA
(lk) ≤ 5 mA
Signaling contacts monitoring Load rating
24 VAC / 35 VDC; max. 50 mA
Connectable length (discharging) max. 18 m (ionizing unit incl. HV-cable)
Operating temperature +5 °C to +45 °C
Storage/transport temperature -15 °C to +60 °C
Weight 16 kg
Mains cable 2,6 m; fixed to the device

Subject to technical changes!

Accessories

Round plug Order-No.: X-0616
Angled plug Order-No.: X-5718
Signalling cable K1
shielded
incl. Round plug
5 m Order-No.: 06.8941.000
10 m Order-No.: 06.8941.001
20 m Order-No.: 06.8941.002

 

 

Brochure


HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.

Sitemap

Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Email Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7