HAUG Power Supplies, Power Packs, High Voltage Power Supply, Multistat And Multistat Plus Power Pack


Power Pack EN C

High Voltage Power Pack Transformers EN-C/EN-C4

Static Control Power Supply EN-C type High Voltage Power Pack Transformers are used to supply HAUG ionizing units. The integrated high-voltage section transforms the applied mains voltage to approx. 7,000 to 8,000 volts. The unit is equipped qith two or four high-voltage terminals. Readiness for service is indicated by an integrated pilot lamp
<< Learn More <<

Power Pack EN CL

The HAUG Compact-Line offers a package of ionizing technique at a reasonable price. Small and easy to handle, the EN CL power pack has a modern layout and is highly efficient. This power pack is equipped with a high-voltage connector (connectable length 5 m). The EI PRQ ionizing bar perfectly complements the power pack EN CL.
<< Learn More <<

Power Pack EN 8 LC

The EN 8 LC power pack represents the state of the art. The monitoring which is integrated in the secondary area indicates that the partial discharge inception voltage (= start of effect of ionization units / ill.1) is too low by making the monitoring LED blink. The compact printed circuit board technology ensures reliability and ease of maintenance. The device has four gas-tight high-voltage connections and has been manufactured in accordance with protection type IP 54, protection class I as per VDE.
<< Learn More <<

Power Pack EN 70

The high-voltage power pack EN 70 / EN 70 LC / EN 70 RLC is a powerful and hardwearing unit. Its design fulfills all electrical engineering requirements. The EN 70 / EN 70 LC / EN 70 RLC power pack is used in fast-running machines in combination with tandem ionizing bars.
<< Learn More <<

Power Pack EN SL

With his modular electronic components the EN SL power pack guarantees a service-friendly power supply.The EN SL power pack comes with two high-voltage connections and was designed to provide HAUG ionizing systems with the required voltage.
<< Learn More <<

Power Pack NF 45

The combination of power pack NF 45 and ionizing bar NFA was developed specifically for use on fast running machines. The power pack NF 45automatically adjusts the discharging frequency (400 – 800 Hz) to the connected bar length. The higher frequency of the power pack NF 45ensures a high decoupled current and therefore fast, even discharge of the material. Still, the ionizing bar NFA is absolutely safe to touch.
<< Learn More <<

Power Pack Multistat

The Multistat power pack in combination with HAUG ionizing units is intended for the removal of electrostatic charges. The mains voltage is transformed by the Multistat to an output voltage of 7 – 8 kVAC for the operation of HAUG ionizing units.
<< Learn More <<

Power Pack Multistat Plus

The high-voltage power pack Multitstat Plus with its long permissible connected length and extended monitoring facilities is a high-performance unit. The Multistat Plus is particularly suited to systems with multiple ionizing bars. The extended functions of the Multistat Plus allow improved monitoring of the ionizing system set-up with this unit.
<< Learn More <<

Power Pack EN 9 Sine

The discharging power pack EN 9 Sine supplies energy to HAUG ionizing units. A functional monitoring facility reports impermissible operating states in the ionizing system such as short circuit and spark formation or thermal overload. The EN 9 Sine can be pulsed and supplies a monitoring signal of the output high voltage.
<< Learn More <<


HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.

Sitemap

Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Enail Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7