Static Elimination (Ionizing) Bars From HAUG


EI SL Ionizing Bar

EI SL Ionizing Bar

Thanks to its state-of-the-art ionization technology, the HAUG EI SL ionizing bar is setting new standards: Ensuring an optimal neutralizing effect, it eliminates electrostatic charges during roll, sheet and web processing.
<< Learn More <<

Static Elimination Bar EI RN

Static Elimination Bar EI RN - Standard Performance

The HAUG EI RN ionizing bar is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively – even at high operating speeds.
<< Learn More <<

Static Elimination Bar EI VC

Static Elimination Bar EI VC - Clean Room Certified

The HAUG ionizing bar EI VC reliably eliminates electrostatic charges in clean rooms. It can be used in both directly for the discharge of objects or for enriching laminar air flows with positive and negative ions.
<< Learn More <<

Static Elimination Bar EI VS

Static Elimination Bar EI VS - High Performance

The HAUG EI VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is considerably enhanced.
<< Learn More <<

EI VS Nut Bar With A T Slot For Mounting

EI VS Nut Bar With A T Slot For Mounting

The version EI VS Nut is equipped with a continuous T-slot. This allows the bar to be mounted without additional brackets with minimum mounting effort und greatest possible flexibility in the choice of fastening points.
<< Learn More <<

Static Elinination Bar EI HRN

Static Elinination Bar EI HRN - High Temperature

The HAUG ionizing bar EI HRN is intended for applications in temperatures up to +130°C. It is a powerful ionizer symmetrically generating positive and negative ions by means of alternating voltage.
<< Learn More <<

Static Elimination Bar EI PS

Static Elimination Bar EI PS - Small Profile

The HAUG ionizing bar EI PS is a mini high-performance ionizer. Thanks to the “power technolgy” developed by HAUG, its operational effectiveness is clearly above other comparable ionizing bars. A particular advantage lies in the symmetry of the emitted ions: positive and negative particles approach the load carrier absolutely uniformly to give contact-free neutralization. They ensure reliable elimination of “spot charges”.
<< Learn More <<

Static Elimination Bar EI W

Static Elimination Bar EI W Special Performance

The ionizing bar EI W is a new development combining the highest output with excellent mechanical stability. At the same time, the modular design of the system ensures a high degree of flexibility and serviceability.
<< Learn More <<

EI Form Segmental Ionizer

EI Form Segmental Ionizer

The HAUG segmental ionizer EI Form has proven its value in the removal of electrostatic charges in the packaging industry and in the medical technology. Production-interfering surface charges can be removed reliably and effectively with the EI Form.
<< Learn More <<

OPI One Point Ionizer

OPI One Point Ionizer

The discharging power pack EN 9 Sine supplies energy to HAUG ionizing units. A functional monitoring facility reports impermissible operating states in the ionizing system such as short circuit and spark formation or thermal overload. The EN 9 Sine can be pulsed and supplies a monitoring signal of the output high voltage.
<< Learn More <<

EI RE Ring Electrode

EI RE Ring Electrode

With their extensive and fully developed technology, ring electrodes EI RE provide a wide-ranging neutralization effect. The plastic processsing industry recognize them as an essential production aid with innumerable applications. The radial and central alignment of the electrode as well as a symmetrical choice of ions, together with large spacious punchthrough guarantee maximum efficiency and performance.
<< Learn More <<

BI Brush Ionizer

BI Brush Ionizer

The brush ionizer (BI) is a passive ionization bar and reduces static charges with very high field strengths on material webs – preferably case in combination with an active ionization system.
<< Learn More <<


HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.

Sitemap

Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Enail Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7