Static Test And Measuring Meters From HAUG


The Static Meter is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volt. It perfectly combines easy operation with accurate measuring technique.

The Static Meter measures charges according to the field influence principle C: The influenced charges, caused by electrically field, generate an alternating current proportional to the electrical field strength. The selective amplifier converts this value into the corresponding field strength or electrical potential – without withdrawing energy from the electric field over the averaged time.

Static Meter I

Static Meter I

The Static Meter I electrofieldmeter is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volt. It perfectly combines easy operation with accurate measuring technique.
<< Learn More <<

Statometer II Field Intensity Meter

Statometer II Field Intensity Meter

The field intensity meter Statometer II is either available with analog or digital display. It is intended for the measurement of electrostatic charges, fields and potentials. This convenient measuring unit is a precision instrument which is suitable for use both in the laboratory and directly at the machine.
<< Learn More <<

Statometer III Field Intensity Meter

Statometer III Field Intensity Meter

The HAUG field intensity meter Statometer III is a consistent further development of the previous field intensity meter Statometer II. It is intended for the measurement of electrostatic and slow alternating fields.
<< Learn More <<

Static Control Field Intensity Meter

Static Control Field Intensity Meter

The field intensity meter Static Control is a reasonably priced and convenient measuring instrument. Using a latching On/Off soft key and two additional soft keys for the measuring ranges 0–100 and 0–1000 kV/m, the Static Control is very simple to operate.
<< Learn More <<

HSM 1 High Voltage Meter

HSM 1 High Voltage Meter

The high-voltage meter HSM 1 is intended to measure AC voltages of up to 10 kVAC on HAUG power packs (A). This meter is equipped with an additional high-voltage socket for connection to an ionizing unit. Thus the power pack and ionizing unit can be tested and their voltage measured during operation.
<< Learn More <<

Digital Static Control Meter

Digital Static Control Meter

The Digital Static Control makes measuring electrostatic charges easy and secure. The meter has a wide measurement range of 0 - 2000 kV/m. The operation is done with a single button.
<< Learn More <<

HSM LED

HSM LED

With the HSM LED it’s possible to install an optical monitoring of the ionization system at a well observable point.
<< Learn More <<

Combicheck High Voltage Test Meter

Combicheck High Voltage Test Meter

Performance testing of power packs and ionizing units (Combicheck). The high-voltage test unit Combicheck is a performance testing unit for HAUG power packs and HAUG ionizing units.
<< Learn More <<

Powercheck High Voltage Test Meter

Powercheck High Voltage Test Meter

The high-voltage test unit Powercheck is a performance testing unit for HAUG power packs.
<< Learn More <<

Multicheck High Voltage Test Meter

Multicheck High Voltage Test Meter

The high-voltage test unit Multicheck is a performance testing unit for HAUG ionizing units.
<< Learn More <<

PZ 3 Perforation Counter

PZ 3 Perforation Counter

The PZ 3 perforation counter is mainly applied in the manufacturing of plastic bags. The contactless detection of perforations allows the number of bags/batches to be determined and indicates when the material rolls need to be changed.
<< Learn More <<


HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.

Sitemap

Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Enail Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7