HAUG PZ 3 Perforation Counter


HAUG PZ 3 Perforation CounterThe PZ 3 perforation counter is mainly applied in the manufacturing of plastic bags. The contactless detection of perforations allows the number of bags/batches to be determined and indicates when the material rolls need to be changed.

Mode Of Operation

Sparks are generated at the point of the perforation of the film by means of a high-voltage electrode (counting electrode) and a suitable earthed/grounded counter-electrode. These sparks are interpreted and counted by the logic circuit integrated in the PZ 3 perforation counter and indicated visually on the display through a light-emitting diode. The counting pulses transmitted by an opto-coupler can be interpreted by an external counter and may be used for activating other machine functions (such as the control of reversing winding machines and cutting machines).

Special Features and Advantages

  • The PZ 3 perforation counter offers the possibility to capture up to 900 counting pulses per minute. This corresponds to a counting rate of 15 counting pulses per second (15 Hz).
  • The duration of the counting impulses is adjustable from 5 to 1000 ms. This helps to suppress subsequent spark-overs that may be triggered by "holes" in the film and should not be counted.
  • The high voltage applied to the counting electrode is infinitely adjustable from 2.4 up to 18 kVDC.
  • The external release of the output voltage can be activated through a voltage-free contact, so that high voltage is applied to the counting electrode, for instance when the material web is moving.

Directions For Installation

The counting electrode must be mounted above the material web at a distance of approx. 10 to 20 mm and centered over the perforations to ensure the perfect functioning of the PZ 3.
An earthed/grounded counter-electrode below the material web (e.g. earthed metal drum) must be in physical contact with the foil opposite the counting electrode.

Technical Data

Types PZ 3 230 V Order-No.: 12.0800.000
115 V Order-No.: 12.0801.000
Dimensions 200 x 200 x 100 mm (L x B x H)
Protection Type IP 54
Supply voltage 115 VAC / 230 VAC (50 – 60 Hz)
HV-terminals 1 terminal for counting electrode
High voltage U = 2,4 to 18 kVDC
Short-circuit current lk < 1 mA
Internal counting lock 5 to 1000 ms
Counting rate max. approx. 15 Hz
(corresponding to 900 pulses per minute)
External voltage at counting output max. 30 VDC (internally isolated via optocoupler)
Operating temperature +5 °C to 45 °C
Storage/transport temperature -15 °C to +60 °C
Weight approx. 2 kg
Mains cable 2,6 m; fixed to the device
Smallest bending radius (cable) R 50


Accessories

Counting electrode AE 005 50 mm Order-No.: 08.8598.105
Counting electrode AE 008 80 mm Order-No.: 08.8598.108
Counting electrode AE 011 110 mm Order-No.: 08.8598.111
Counting electrode AS SL Order-No.: 08.8715.000
Signalling cable K1; 5 m Order-No.: 06.8941.000
shielded, 10 m Order-No.: 06.8941.001
mit Round plug 20 m Order-No.: 06.8941.002
Round plug Order-No.: X-0616
Angled plug 5 m Order-No.: X-5718


Subject to technical changes!

Brochure


HAUG Static Control Products And Solutions For Industry

About Haug North America

At Haug North America, we are committed to providing each and every customer with unsurpassed application planning and assistance, high-quality state-of-the-art products that meet or exceed industry standards, and the highest level of technical support and service.

Since its founding in 1957, Haug has established an enviable reputation for excellence. Our extensive product line and worldwide distribution network assures our customers of fast and convenient availability of exactly the right products for each and every application.

Sitemap

Our Products

The product design team at Haug is devoted exclusively to the development of state-of-the-art static measurement, control and generation products and systems for use in industrial processes. Without the distraction of non-static related products, our design and development engineers remain focused on providing the ultimate in static control.

Haug products and systems undergo the most rigorous quality control testing, ensuring long trouble-free operation and a safe and operator friendly work environment. This commitment to quality is of particular importance in safety features such as shielded coaxial cable and Haug's patented X-2000 connection system.

Sample Content

Haug North America. provides an indepth information on static control and sttic elimination products. The HAUG Static Eliminator Bar (Ionizing Bar) are a powerful and strong piece of equipment. The HAUG RI-LG Ionizing Air Gun has its name with good reason: this ionizing device, with its service friendly handling, is a peerless innovation in the field of elimination of dust and charges.HAUG Charging Generators are high-voltage generators that work in conjunction with HAUG charging electrodes to apply electrostatic charges without physical contact, for example, for fixing, positioning and electrostatic "adhesion". Much more information on our product line is available on this web site.

Get in Touch

  • Canada:
    (416) 410 1806
  • Email:
    Enail Us
  • Address:
    10520 Yonge Street, Unit 35B-220
    Richmond Hill, ON
            L4C 3C7