1/8 DIN Fuzzy Logic Digital Indicator Controller
FuzyPro Model 8010

1/8 DIN Fuzzy Logic Digital Indicator Controller

1/8 DIN, Digital Indicator Controller, Fuzzy Logic, FuzyPro, Model 8010The FuzyPro 1/8 DIN Fuzzy Logic Digital Indicator Controller Model 8010 available with red or green displays. One latchable relay is fitted as standard, plug-in modules allow two more alarm relays, PV retransmission or transmitter PSU.

  • Four-digit LED display

  • Up to 3 alarms

  • transmitter PSU option

  • Min/max value hold

  • Engineering units

  • PC configuration

  • PV retransmit option

  • RS485 comms option

1/8 DIN Fuzzy Logic Digital Indicator Controller Features:

Output Configuration

Up to 3 total, max 3 for Alarms, max 1 for retransmit of PV, max 1 transmitter power supply

Alarm 1, 2 & 3 Types

Process high, process low, direct acting, process high, process low reverse and logical OR

Viewable Values

Process variable, maximum value, minimum value and elapsed time since reset


ºC/ºF LED, Labels for 27 other common units, mounted behind clear window

Human Interface

3 button operation, 4 digit 13 mm high red or green display, plus setup, alarm, max & min indicators

PC Configuration

Off-line configuration from serial port to dedicated config socket (comms option not required)


1/8 DIN Fuzzy Logic Digital Indicator Controller Input:


J, K, R, S, T, B, L, & N


3 wire PT100 50 per lead maximum (balanced)

DC Linear

0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scalable -1999 to 9999, dec point available


>100M for Thermocouple and mV ranges, 47K for V ranges and 4.7 for mA ranges


+/- 0.25% of input scan +/- 1 LSD (T/C CJC better than 0.7ºC)


4 per second, 14 bit resolution approximately

Sensor Break Detection

<2 secs (except zero based DC ranges), *high alarms activate (*low for RTD, mA or V)


1/8 DIN Fuzzy Logic Digital Indicator Controller Outputs & Options:

Alarm 1 Relay

Contact SPDT 2Amp resistive at 240V AC, >500,000 operations, latching or non-latching. Fitted as standard

Alarm 2 & 3 Relays

Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations (optional)

Retransmit Output

0-20/4-20mA to 500 max, 0-10/0-5V into 500 min. Accuracy typically +/- 0.25%

Transmitter Power Supply

20-28V DC (24V nominal), max load 910 (22mA at 20V)

Remote Reset

External reset of latching alarm 1 relay. Volt free or TTL input (Reset = open to close or "0" to "1" transition. 0 = -0.6 to 0.8V, 1 = 2 to 24V)


2 wire RS485, 1200 to 9600 baud. Modbus or West ASCII (selectable)


1/8 DIN Fuzzy Logic Digital Indicator Controller Operating & Environmental:

Temperature & RH

0 to 55ºC (-20 to 80ºC storage), 20% to 95% RH non-condensing

Power Supply

100 to 240V 50/60Hz (optional 20 to 55V AC/22 to 65V DC), approx 4 Watts

Front Panel Protection

IEC IP66 (Behind panel protection is IP20)

Approvals and Certification

CE, UL & ULc


FuzyPro 8010 Brochure

FuzyPro 8010 Manual

For Quick Delivery From Stock - CANADA & USA TOLL FREE: 1-800-279-9912

About Us

Heaters Controls And Sensors LTD., is a manufacturer of heaters, custom control panels, controls and sensors. We also provide instrumentation solutions for industrial, petroleum, chemical and food equipment applications.


Our Products

Dataloggers, sensors, recorders, timers, hand held instruments, controllers of different sizes for a variety of industrial applications. Heaters Controls And Sensors LTD., also manufacturers industrial heaters, custom control panels, the FuzyPro product line of controllers and data loggers.

Website Content

Dataloggers, Sensors, Recorders, Timers, Hand Held Instruments, Fuzzy Logic Controllers, PID Controllers, Industrial Heaters, Custom Control Panels, Recorders, Timers, Infared Instrumentation, Ultrasonic Sensors are some of the products you will find on this site.

Get in Touch

  • Toll Free:
  • Telephone:
    (519) 686-2715
  • Fax:
    (519) 686-8159
  • Email:
  • Address:
    60 Meg Drive
    London, ON
    N6E 3T6 Canada
  • Website: