4-Wire Current Transmitter CR4340

4-Wire, Current Transmitter, CR4340The CR4340 4-Wire Current Transmitter produces a calibrated 4-20 mA DC signal proportional to the average RMS value of the input alternating current. The output signal is produced by an internal current generator powered by an external 120 Vac supply.

 

The output signal is unaffected by variations in interconnect and load impedance (within specification limits) thus providing a highly accurate means for monitoring alternating current over long distances. The 4-wire transmitter allows for direct attachment to instrumentation. There is no need for external DC power as required with 2-wire transmitters.

 

Wire Mounted Current Indicator
Wire Mounted Current Indicator
Wire Mounted Current Indicator
Permanently calibrated
Output overload protected
Supply, signal and input fully isolated
13 different ranges - 6 field selectable
Internal current generator
2 case styles, .94" and 2.13" window opening
Monitors over long distances
Accuracy: +/- 0.5% Full-Scale (FS)
Ripple & Noise: 1% max., peak to peak
Calibrated Signal Out: 4-20 mA DC
Response Time: 150ms max., 10-90% FS
Max. Signal Out: 30mA DC
Monitor alternating current over long distances
Direct attachment to instrumentation
CR Magnetics Current Transducer Catalog
CR Magnetics Current Transformer Catalog
CR Magnetics Commercial & Metering Class Current Transformers

 


 


Heaters Controls And Sensors Products