Easylog USB Control Software For Data Loggers

Easylog USB Control Software For Data Loggers

Easylog, USB Control Software, Data LoggersThe core of Lascar's data logging solution is the free software supplied with each data logger. Using a wizard format to guide the user through setup of the data logger and subsequent download of collected data, the software puts the 'easy' into EasyLog.

EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs under Windows 2000, XP (

Home and Professional Editions) & Vista (32-bit). The software is used to set-up the data Easylog, USB Control Software, Data LoggersEasylog, USB Control Software, Data Loggerslogger as well as download, graph and export data to Excel. The software allows the following parameters to be configured:

  • Logger name

  • °C, °F

  • Logging rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)

  • High and low alarms

  • Immediate, delayed and push-to-start logging

  • Display off, on for 30 seconds after button press, or permanently on

  • Data rollover (Allows unlimited logging periods by overwriting the oldest data when the memory is full)

The latest version of the control software may be obtained free of charge contact hcs@hcs77.com

How To Setup An EL-USB Data Logger

Downloading Data Demonstration

EL-USB-TC-LCD,Thermocouple Data Logger with LCD and USB Interface,Thermocouple,Data,Logger,LCD,USB,Interface,EasyLogYour Thermocouple

The probe supplied with your EL-USB-TC-LCD is a K-type thermocouple designed to measure temperatures from 0 to 400ºC (32 to 752ºF). The EL-USB-TC-LCD is designed to work with J, K and T-type thermocouples fi tted with a standard mini thermocouple connector; this makes your data logger compatible with a wide range of available thermocouples. Your application will determine which probe is most suitable based on temperature range, accuracy, form and price.

LED Flashing Modes

EL-USB-TC-LCD features two LEDs that indicate the logging, battery and alarm status:

  • The first LED fl ashes red (R) to indicate that the EL-USB-TC-LCD is in an alarm condition. It will flash when the logged temperature has exceeded a Low or High alarm level.

  • The second LED fl ashes green (G) to indicate that the EL-USB-TC-LCD is not in an alarm condition.

Hold is enabled by default, which forces the logger to continue flashing the red LED after an alarm, even when the temperature has returned to normal. This feature ensures that the user is notifi ed that an alarm level has been exceeded, without the need to download the data from the logger

Hold can be turned off via the control software. The red LED will then only fl ash whilst the logger is in an alarm condition. When the temperature returns to normal, the green LED will flash.


For Quick Delivery From Stock - CANADA & USA TOLL FREE: 1-800-279-9912

About Us

Heaters Controls And Sensors LTD., is a manufacturer of heaters, custom control panels, controls and sensors. We also provide instrumentation solutions for industrial, petroleum, chemical and food equipment applications.


Our Products

Dataloggers, sensors, recorders, timers, hand held instruments, controllers of different sizes for a variety of industrial applications. Heaters Controls And Sensors LTD., also manufacturers industrial heaters, custom control panels, the FuzyPro product line of controllers and data loggers.

Website Content

Dataloggers, Sensors, Recorders, Timers, Hand Held Instruments, Fuzzy Logic Controllers, PID Controllers, Industrial Heaters, Custom Control Panels, Recorders, Timers, Infared Instrumentation, Ultrasonic Sensors are some of the products you will find on this site.

Get in Touch

  • Toll Free:
  • Telephone:
    (519) 686-2715
  • Fax:
    (519) 686-8159
  • Email:
  • Address:
    60 Meg Drive
    London, ON
    N6E 3T6 Canada
  • Website: