Single Element Stator Winding RTD's

Single Element Stator Winding RTD's

Ultra Flat, laminated "stick" RTD's fit in slots between stator windings to monitor temperature rise and prevent overheating.

The National Electrical Manufacturers Association (NEMA) recognizes embedded detectors as a standard protection for motor and generator insulation.

Unlike on-off devices, RTD's provide continuous sensing for earlier warning without unnecessary false alarms and trips.

The sensing elements of stator RTD's extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot.

Six sensors are recommended for each motor, two per phase. Sensors should be located near the hottest point of the windings for best performance.

HCS's stator RTD's meet the specifications of ANSI C50.10-1990, general requirements for synchronous motors.


  • Temperature range: -70ºC to +500ºC (continuous operation) (temporary use to 550ºC possible)

  • Body material: High temperature epoxy glass.

  • Thickness (mm): 1, 1.5, 2, 2.5 & above as per customer requirement

  • Length (mm): 20, 45, 100, 150, 200, 250 & above as per customer requirement

  • Standard body width (inches): 6mm (1/4") & above as per Customer requirement

  • Tolerance class A: - 50ºC to + 300ºC

  • Temperature coefficient: TCR = 3850 ppm/K

  • Leads: Pt clad Ni wire

  • Long-term stability: max. R0-drift 0.04% after 1000 h at 500ºC

  • Vibration resistance: at least 40 g acceleration at 10 to 2000 Hz, depends on installation

  • Shock resistance: at least 100 g acceleration with 8ms half sine wave, depends on installation

  • Self heating: 0.4 K/mW at 0ºC



For Quick Delivery From Stock - CANADA & USA TOLL FREE: 1-800-279-9912

About Us

Heaters Controls And Sensors LTD., is a manufacturer of heaters, custom control panels, controls and sensors. We also provide instrumentation solutions for industrial, petroleum, chemical and food equipment applications.


Our Products

Dataloggers, sensors, recorders, timers, hand held instruments, controllers of different sizes for a variety of industrial applications. Heaters Controls And Sensors LTD., also manufacturers industrial heaters, custom control panels, the FuzyPro product line of controllers and data loggers.

Website Content

Dataloggers, Sensors, Recorders, Timers, Hand Held Instruments, Fuzzy Logic Controllers, PID Controllers, Industrial Heaters, Custom Control Panels, Recorders, Timers, Infared Instrumentation, Ultrasonic Sensors are some of the products you will find on this site.

Get in Touch

  • Toll Free:
  • Telephone:
    (519) 686-2715
  • Fax:
    (519) 686-8159
  • Email:
  • Address:
    60 Meg Drive
    London, ON
    N6E 3T6 Canada
  • Website: