Melt Pressure Indicator Tracker Series 250 from Data Track

Melt Pressure Indicator, Tracker Series 250, Data Track Transducer Excitation Supply
Max / Min Memory
Isolated Analog Output
Two Logic Inputs
Transducer Health "Test" Function
Adjustable Display Resolution
Universal Power Supply
Serial Communications

The Tracker 250 Series Melt Pressure Indicator is designed specifically for use with Melt Pressure Transducers. Data Track's "Fast Cal" feature provides a fast and simple method of calibrating an indicator, using the transducers internal calibration resistor. Re-calibration can be undertaken whenever the transducer is at ambient pressure (i.e. has no pressure applied to it). Should the transducer be faulty, or incorrectly wired, this will be indicated during the calibration procedure.

Both the Tracker 253 Series Melt Pressure Indicator and 254 Series Melt Pressure Indicator have a 5-digit display and transducer supply as well as many advanced software features. In addition, both models are fitted with an analogue output and an RS 422/485 communications interface to allow connection to data loggers, chart recorders, PLCs and computers. The Tracker 254 Series Melt Pressure Indicator also has two alarm relays, both with volt free change over contacts. The displayed pressure can be in psi, bar, MPa or any other engineering units. A special "test" function allows the transducer wiring and calibration to be checked.

Tracker 250 Series Melt Pressure Indicator