Displacement Measuring System Kaman KD2300

Displacement Measuring System, Kaman, KD2300Kaman Instrumentation’s Multi-VIT Displacement Measuring System, the KD-2300, is a noncontact linear proximity measuring system.This easy-to-use system makes high precision static and dynamic measurements for product design, fabrication, process control, and inspection of metal objects. It replaces LVDTs, air gauges, dial indicators, and micrometers.

The Displacement Measuring System Kaman KD2300 includes a sensor, power and output cable, and signal conditioning electronics package. Zero, gain,and linearity adjustments are provided on the electronics package.The output voltage of the system is proportional to the distance between
the face of the sensor and any metallic (conductive) target.

Depending upon the system, the standard sensor cable length may be increased to a maximum of 30 feet (9.15 m). If special sensor designs or improved system performance are required, contact an Intertechnology Instrumentation application engineer for assistance.

Certain internal components in the Displacement Measuring System Kaman KD2300 family precisely match the signal conditioning electronics to a specific sensor and cable. To change the sensor size and/or cable length, a corresponding bridge card must also change.This is an easy task, requiring only a screw driver, that can be accomplished in a matter of minutes.

Contact Intertechnology for the type of sensor/cable conversion you wish to make.


Multi-Purpose Variable Impedance Transducer (Multi-VIT) is a displacement measuring system
Economical single-channel units
Long-term stabilityand repeatability
Measuring range from 0.020 to 2.0 inches
Resolution better than 0.01% of measuring range
Linearity better than 0.5 to 1% measuring range
Frequency response to 50 kHz

Displacement Measuring System Kaman KD2300