Multichannel Charge Amplifier Kistler Types 5034A2, 5034A3, 5036A

Multichannel Charge Amplifier,Kistler,Type,5034A2,5034A3,5036A,industrial amplifier Multichannel Charge Amplifier Kistler Types 5034A2, 5034A3, 5036A industrial amplifier for converting charge signals from quartz sensors into proportional voltage signals.

Particularly suitable for use in machine monitoring systems because of their sturdy construction. Several selectable measuring ranges. Available with one, two or three measuring channels.

The measuring range can be selected in situ using jumpers or (only Type 5034A31) by remote control using a BCD code. Signal input, signal output and supply are electrically isolated from one another. This avoids problems associated with multiple grounding or ground loops.

The instruments conforming to EC with EC Directive 89/336/EC and comply with EM standards for industrial equipment (EN 50081-2 regarding interference emission and EN-50082-2 regarding interference immunity), in which compliance is required with the relevant installation information.

Electrical isolation of signal input, signal output and power supply
Sealed case, degree of protection is IP 67
Rugged, vibration resistant
Simple selection of the measuring range in situ, also by remote control (Type 5034A31 only)
3 parallel-connected coaxial input sockets per channel, e.g. for summing signals
Conforming to CE

Kistler Types 5034A2, 5034A3, 5036A Multichannel Charge Amplifier