PinSens Type 9204B is a simply constructed
force sensor for indirect mold cavity pressure measurement behind a measuring or ejector pin. The diameter of the measuring
or ejector pin must be taken into account in the conversion from for to pressure.
The outer diameter corresponds to
the usual 1/2" x 1/8" mounting grooves. The sensor can be secured with the screw supplied. Although the mold cavity pressure
in industrial applications is normally measured directly in the cavity, there are situations in which this is not possible,
for exaple for reasons of space. PinSens is a cost-effective alternative in such cases.
• Interchangeable high temperature cable with "Fischer" connector
• Simple design and handling
PinSens Type 9204B is a simply constructed
force sensor for indirect mold cavity pressure measurement behind a measuring or ejector pin. The diameter of the measuring
or ejector pin must be taken into account in the conversion from for to pressure.
