Kistler Miniature Pressure Measuring Probe Model 6053BB

Kistler,Miniature,Pressure,Measuring,Probe,Model,6053BB The Kistler Miniature Pressure Measuring Probe Model 6053BB with very small dimensions and M5 x 0.5 mounting thread is particularly suitable for direct installation in small-capacity combustion engines with more than 2 valves per cylinder.

Kistler Miniature Pressure Measuring Probe Model 6053BB uses a new type of piezoelectric crystal with which a sensitivity of -20 pC/bar is achieved. The sensitivity over a temperature range of 200 +/-50°C varies by not more than +/-0.5%. The influence of engine vibrations on the measuring signal is reduced by the passive acceleration compensation.

Installation through the coolant channel is possible without expensive modification of the cylinder head, and without an additional mounting sleeve. Sealing against coolant leakage is provided by O-rings fitted to the sensor. The front seal allows good heat dissipation and thus a maximum short-time probe operating temperature of 400°C.

Good temperature stability of the sensitivity
Acceleration-compensated
Needs only 6 mm mounting bore
Low thermal shock error and long life thanks to the front seal
Very high sensitivity

Kistler Model 6053BB Miniature Measuring Probe