Miniature Pressure Measuring Probe Kistler Models 6057A80, 6057

Miniature,Pressure,Measuring,Probe,Kistler,Models,6057A80,6057 Miniature Pressure Measuring Probe Kistler Models 6057A80, 6057 for direct mounting or mounting in a glow plug adapter, resulting in an extremely short gas duct.

It can also be used in multivalve engines with small displacement. For the front diameter of only 4 mm, a measuring bore of 5 mm is sufficient. The probe mounts easily, after only slight modifications of the cylinder head, even across cooling water ducts, whereby sealing is assured by O-rings.

In the Miniature Pressure Measuring Probe Kistler Models 6057A80, 6057, a new piezoelectric crystal is used which gives the sensor of unchanged size a sensitivity of -15 pC/bar. This will vary at most by ±1.5% within the temperature range of 200 ±50°C. The front sealing guarantees efficient heat dissipation and therefore a short-time maximum operating temperature of 400°C.

The Miniature Pressure Measuring Probe Kistler Models 6057A80, 6057 performs measurements under critical space conditions in the engine combustion chamber: multivalve engines, motorcycles and small engines. For indicating cylinder pressure in diesel engines with glow plug adapter.

Resistant to knocking
Especially for indicating with glow plug adapter
Low thermal shock error thanks to front sealing
Very high sensitivity thanks to new piezoelectric crystal

Kistler Models 6057A80, 6057 Miniature Measuring Probe