Miniaturized quartz sensor with single-wire technology for mold cavity pressures up to 2000 bar in the injection molding of plastics.
The miniaturized quartz sensor for mold cavity pressure Type 6182AE has a 2.5 mm diameter front
face. The very small cross-sectional area of the single-wire cable allows flexibility of installation.
Shielding in the single-wire technology is provided by the mold. It is therefore essential for the cable
and connector to be integrated in the mold.
For multi-cavity applications, the sensor Type 6182A
without the connector is used. Multi-cavity systems are described in the data sheet for Type 6829A. The
pressure acts directly on the entire front face of the sensor and is transferred to the quartz measuring
element, which produces a charge proportional to the pressure. All parts of the sensor are corrosion
resistant. The Fischer connector is self-locking and splash-proof.
This sensor is designed without a diaphragm and measures mold cavity pressures up to 2000 bar during injection molding.
• Ideally suited for industrial applications
• Designed without a diaphragm and with a level, machinable front face
Miniaturized quartz sensor with single-wire technology for mold cavity pressures up to 2000 bar in the injection molding of plastics.
