Preloading Elements From Kistler Instrument Corporation

Kistler,Kistler Instrument,Corporation,sensors,force,pressure,acceleration,torque,sensor,piezoelectric pressure sensors,piezoresistive pressure sensors,force sensors,torque sensors,accelerometers,acceleration sensors

Set of Preloading Elements for Load Washers

The standardized preloading elements are used for mounting the load washers Types 9001A... 9071A. A set of preloading elements consists of a preloading bolt, a hexagon nut, a centering sleeve and two insulating washers.

Set of Preloading Elements for Force Sensors

The standardized preloading elements are used for mounting the multicomponent force sensors Types 907X with internal diameter of 40.5 mm. A set of preloading elements consists of a hollow preloading bolt, a screw nut, a centering sleeve and a sliding washer.


Acceleration Sensors
| Force Sensors | Pressure Sensors | Torque Sensors
Signal Conditioners | Cables | Calibration Equipment | Electronics | Mounting
Measuring Instruments | Monitoring & Control Units | Preloading Elements


Kistler Set of Preloading Elements For Load Washers, Type 9420A01 ... 9420A71
The standardized preloading elements are used for mounting the load washers Types 9001A, 9071A.
 
Kistler Set of Preloading Elements, M20 x 1,5 for Force Sensors, Type 9451
The standardized preloading elements are used for mounting the force sensors Types 9047B, 9048B with internal diameter of 14.1 mm.
 
Kistler Set of Preloading Elements For Force Sensors, Type 9455
The standardized preloading elements are used for mounting the multicomponent force sensors Types 907X with internal diameter of 40.5 mm.
 
Kistler Set of Preloading Elements, M26 x 0,75 for Force Sensors, Type 9459
Standard preloading elements are used for mounting multicomponent force sensor Type 906X that have an internal diameter of 26.5 mm.
 
Kistler Set of Preloading Elements For Force Sensors, Type 9461, 9461sp
The standardized preloading elements are used for mounting the quartz force sensors Types 9251A, 9252A, 9601A with internal diameter of 8.1 mm.
 
Kistler Set of Preloading Elements, M14 x 1,5 for Force Sensors, Type 9465
The standardized preloading elements are used for mounting the force sensors Types 9047B, 9048B with internal diameter of 14.1 mm.