Lebow Torque Sensors, Transducers, Measurement, Load Cell

This handbook describes the variety of Torque Sensors, Torque Transducers, Load Cells, Force and Torque Measurement Transducers in full detail, stressing the applications oriented nature of proper transducer selection.
 

Lebow Torque Transducers, Sensors, Force Load Cell

Lebow supplies a wide selection of Torque Transducers, Torque Sensors, Force Load Cells, Force and Torque Measuring Transducers.
 

Model 1700 Series Torque Transducer

These transducers are suitable for laboratory applications as well as industrial environments.
 

Portable Strain Display Load Cell/Force Indicator

The 7561-PSD is a completely portable strain gauge battery powered indicator, packaged in a small, robust IP65/NEMA 4 enclosure. For simplified use, the operator only has access to six keys. Two separate ranges are available, which enable the instrument to read and display two units of measure.
 

Lebow TMS9000 Series Torque Measurement System

Lebow's TMS9000 Torque Measurement System represents an advanced generation of rotary transformer sensors designed to operate completely in the digital domain for accurate measurement and output versatility. The TMS9000 series physically integrates rotor and telemetry into one element, with all set-up and output controlled through computer software, providing expansive testing capabilities.
 

Lebow Automotive Load Cell

Featuring the Lebow Automotive Load Cell Model 3419 Lebow Seat Belt Sensor, Model 3663 Lebow Pedal Pressure Sensor and Model 3663-111 Lebow Pedal Pressure Sensor.
 

Lebow Bolt Force Sensor Load Cell

The Bolt Force Sensor Load Cell is another unique transducer from Lebow which is essentially a hollow-compression strain gauge load cell. It is designed to be used with most strain gage indicators
 

Lebow Compression Load Cell

The Compression only Load Cell was developed by Lebow engineers to deliver a high degree of performance at low cost and low deflection.
 

Lebow Fatigue Resistant Load Cell

Lebow Fatigue Resistant Load Cell is the result of many years of design development. You will note from the specifications that these load cells are extremely resistant to extraneous bending and side loading forces.
 

Lebow General Purpose Load Cell

General Purpose Load Cells are precision general purpose deisgn, having exceptional structural capability to withstand extraneous loads such as torque, bending moments and side loads.
 

Lebow General Purpose Calibration Standard Load Cell

The Model CS3140 General Purpose Calibration Standard Load Cells series has been designed as a reference standard for calibration labs in automotive, aerospace, military or industrial markets.
 

Lebow General Purpose Precision Load Cell

High-accuracy version of standard 3140 Series. Low height, smaller guaranteed maximum off-center load and moment error than standard 3140 Series, static error band 0.02–0.04%, low creep.
 

Lebow General Purpose Stainless Steel Load Cell

Stainless Steel Load Cells Lebow Model 3169 Series offers sealed, barometrically compensated construction. It is ideally suited for scales and other critical weighing applications.
 

Lebow Harsh Environment Load Cell

The Model 3270 load cell series has been designed to work
in harsh environments. These tension/compression load cells
are made from 17-4PH stainless steel and are hermetically
sealed to an IP67 rating.
 

Lebow Hollow Load Cell

Hollow Load Cells are avaialble for compression only loads in capacities of 25K, 50K and 100K lbs., and for tension compression loads in capacities of 5K, 10K and 20 K lbs.
 

Lebow Load Cell Overload Protectors

The Lebow Load Cell Overload Protector is available in sizes that will accommodate load cells with capacities up to 3,000 lbs. and overloads to 15,000 lbs. in tension and 20,000 lbs. compression.
 

Lebow Model 3161-300 Force Transducer

Universal load cell for all static and dynamic applications in the areas of industrial testing, experimental mechanics and assembly testing.
 

Lebow Model 6736 Series Torque Wrench Sensor Checker

Improve quality and save money by verifying the accuracy of your own torque wrenches.
 

Lebow X-Y Force Sensor Load Cell

X-Y Force Sensor from Lebow is constructed of two strain gage bridges, mounted at 90º, isolated by a flexure system. The complete two-component system, including flexures, is machined from one specially prepared metal billet to provide unusual structure strength and to minimize crosstalk between the two transducers.