Bolt Force Sensor Load Cell from Lebow Products Inc


Model 3714
Bolt, Force Sensor, Load Cell, Lebow
Bolt Force Sensor Load Cell Lebow Model 3714

The Bolt Force Sensor is another unique transducer from Lebow which is essentially a hollow-compression strain gage load cell. It is designed to be used with most strain gage indicators.

The Bolt Force Sensor is a three-piece assembly consisting of:
1. A large hardened and ground flat washer with one side beveled.
2. The sensor
3. A small hardened and ground washer

Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and up to 20mm
- Sensor and washers–carpenter 440C stainless steel, hardness Rc 58-60
- Sensitive to neither bolt or nut applied torque

Consult Intertechnology Inc. for Capacities.


 
Model 3718
Bolt, Force Sensor, Load Cell, Lebow
Bolt Force Sensor Load Cell Lebow Model 3718

The Bolt Force Sensor is another unique transducer from Lebow which is essentially a hollow-compression strain gage load cell. It is designed to be used with most strain gage indicators.

The Bolt Force Sensor is a three-piece assembly consisting of:
1. A large hardened and ground flat washer with one side beveled.
2. The sensor
3. A small hardened and ground washer

Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and up to 20mm
- Sensor and washers–carpenter 440C stainless steel, hardness Rc 58-60
- Sensitive to neither bolt or nut applied torque

Consult Intertechnology Inc. for Capacities.


 
Model 3719
Bolt, Force Sensor, Load Cell, Lebow
Bolt Force Sensor Load Cell Lebow Model 3719

The Bolt Force Sensor is another unique transducer from Lebow which is essentially a hollow-compression strain gage load cell. It is designed to be used with most strain gage indicators.

The Bolt Force Sensor is a three-piece assembly consisting of:
1. A large hardened and ground flat washer with one side beveled.
2. The sensor
3. A small hardened and ground washer

Features:
- Compact
- High output
- Standard models for bolts size no. 6 through 2"and up to 20mm
- Sensor and washers–carpenter 440C stainless steel, hardness Rc 58-60
- Sensitive to neither bolt or nut applied torque

Consult Intertechnology Inc. for Capacities