Continuous Ultrasonic Level Transducers From Siemens

Siemens Echomax ultrasonic level transducers are used with our ultrasonic level controllers, such as HydroRanger, MultiRanger, SITRANS LU, and SITRANS LUC500. They provide trouble-free, reliable performance. The complete line of transducers is the logical choice for monitoring levels of liquids, slurries, and solids in a wide range of industries.

True level control.

They are impervious to dust, moisture, vibrations, flooding, and high temperatures. The non-contacting ultrasonic technology means there is no material buildup, no corrosion, and no down-time. Siemens transducers are easy to install and are virtually maintenance-free. Mounting brackets are available for easy installation.

Echomax® XRS-5 ultrasonic level transducer provides reliable, continuous level monitoring of liquids and slurries in narrow lift stations/ wet wells, flumes, weirs and filter beds using a beam angle of just 10° and a CSM rubber face.

The XRS-5 is non-contacting with a measuring range from 0.3 to 8 m (1 to 26 ft). Advanced echo processing ensures reliable data even in conditions with obstructions, turbulence and foam.

The hermetically sealed CSM rubber face and the PVDF copolymer enclosure are designed for maximum resistance to methane, salt water, caustics and harsh chemicals common to wastewater installations. With an IP68 degree of protection, this rugged sensor is fully submersible in the event of flood conditions. Use a submergence shield if full submergence is possible in the application. A submergence shield will maintain a high level reading output during submerged conditions.

The low-cost XRS-5 ultrasonic level transducer is compatible with a full range of Siemens ultrsonic level controllers, from a basic system for high/low alarm or simple pump control, up to advanced control systems with communications, telemetry and SCADA integration capabilities.

Key Applications: wet wells, flumes, weirs, filter beds.

ST-H level transducers use ultrasonic technology to measure level in chemical storage and liquid tanks.

The narrow design of the ST-H allows the transducer to be mounted on a 2" (50.8 mm) standpipe. When mounted correctly, it is completely protected from the process and can even be used in harsh, corrosive environments.

During operation, the ultrasonic level transducer emits acoustic pulses in a narrow beam perpendicular to the transducer face. The level transceiver measures the propagation time between pulse emission and reception of the echo to calculate the distance from the transducer to the material. Variations in sound velocity due to changes in temperature within the permissible range are automatically compensated by the integral temperature sensor.

Key Applications: chemical storage, liquid tanks

Echomax XRS-5

Echomax XPS and XCT

Echomax XLT

ST-H Transducer

Ultrasonic Level Transducers Complete