Continuous Hydrostatic Level Transmitters From Siemens
Kentron Systems Index
Kentron Systems Index
Siemens
Siemens Level Measurement
Point Level Measurement
Continuous Level Measurement
Interface Level Measurement
|
In the field of interface measurement and monitoring, Siemens offers technologies covering a broad range of applications for point level measurement and continuous level mesurement.
The optimal interface measurement transmitter for every task.
Pointek CLS100’s short insertion length of 100 mm (4") and versatility in various applications and in vessels or pipes makes it a good replacement for traditional capacitance sensors.
Its advanced tip-sensing technology provides accurate, repeatable switchpoint performance. The PPS (Polyphenylene sulfide) probe [optional PVDF (Polyvinylidene Fluoride)] is chemically resistant with an effective process operating temperature range from -30 to +100 °C (-22 to +212 °F) (7ML5501), and -10 to +100 °C (+14 to +212 °F) (7ML5610). The fully potted design ensures reliability in a vibrating environment such as agitated tanks up to 4 g. When used with a SensGuard protection cover, the CLS100 is protected from shearing, impact and abrasion in tough primary processes.
The Pointek CLS100 is available in three versions. The integral cable version has a stainless steel process connection and probe options of PPS or PVDF. The fully synthetic version has a thermoplastic polyester enclosure with a PPS process connection combined with a PPS probe. The standard enclosure version has a thermoplastic polyester enclosure with a stainless steel process connection in combination with a PPS or PVDF probe.
Key Applications: liquids, slurries, powders, granules, food and pharmaceuticals, chemicals, hazardous areas
Patented Active-Shield technology ensures that measurement is unaffected by vapours, product deposits, dust and condensation. The unique mechanical probe design coupled with a high performance transmitter gives superior performance in a wide range of level detection applications.
Pointek CLS500’s microprocessor-based electronics provide one-point calibration, making setup possible without shutting down your production process.
Key Applications: foam or liquid/foam level, glycol regenerators, high-pressure coalescers, LNG applications
|
Interface measurement and monitoring.
Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. 
Pointek CLS500 is an inverse frequency shift capacitance level switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of high temperature and pressure.