Micro100 Laboratory Turbidimeter for Turbidity Testing


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Designed to provide the accuracy demanded by today’s scientist, the Micro100 Laboratory Turbidimeter is ready to meet the challenge. Features like the Auto Alert Calibration Prompt and the Quick Connection Lamp Module, allow for simple calibration and low maintenance. With a resolution of 0.01 NTU at low turbidity readings and an extended range to 1,000 NTU, the Micro100 is an ideal and affordable tool for research as well as routine analytical measurements.

Features

  • Auto ranging 0 - 1000 NTU
    Instrument senses turbidity level of sample and automatically adjusts to the appropriate measurement

  • Auto alert calibration prompt
    Automatically prompts the operator when calibration of the instrument is needed

  • Simple calibration procedures
    Calibration initiated with the push of a button ensures accurate readings

  • RS-232 output
    Date, time, and NTU reading can be captured with a serial printer or data recorder

  • Made in the USA

Optional Features

  • Infrared light source (Micro100 IR)

    Meets international standard ISO 7027 for turbidity measurement

  • Pour-through assembly
    Save time by pouring your grab sample through the measurement chamber

  • ProCal calibration standards
    Quick and easy calibration across all ranges without the need to mix Formazin

Specifications

Principal of operation Nephelometric non-ratio
Range Auto ranging from 0 - 1000 NTU
Accuracy ± 2% of reading plus 0.01 NTU
Resolution 0.01 NTU (0 - 9.99 NTU)
0.1 NTU (10 - 99.9 NTU)
1 NTU (100 - 1000 NTU)
Response time less than 6 seconds
Sample size 30 ml (27ml minimum)
Light source Quick connect Tungsten Filament or Infrared Operating
Temperature 32° - 122°F (0° - 50°C)
Outputs RS-232 serial port
Dimensions 10.75 x 10 x 3.75 inches (27.3 x 25.4 x 9.5 cm)
Weight 2.9 lbs. (1.32 kg)
Safety rating UL, CSA, CE

 

Literature and Specifications
Operator's Manual

Chlorine Pocket Photometer Instruments and Accessories

Instruments

Model Description
19950 Micro100 WL Laboratory Turbidimeter, 0 - 1000 NTU, Universal Power 100-240V 50-60 Hz Includes a complete set of calibration standards (0.02, 10 and 1000 NTU), two measuring cuvettes with light shield cap, operator's manual and a universal power adapter that operates at any voltage between 100-240VAC.
19952 Micro100 IR Laboratory Turbidimeter, 0 - 1000 NTU, Universal Power 100-240V 50-60 Hz Includes a complete set of calibration standards (0.02, 10 and 1000 NTU), two measuring cuvettes with light shield cap, operator's manual and a universal power adapter that operates at any voltage between 100-240VAC.
20001 Micro100 WL Laboratory Turbidimeter, 0 - 1000 NTU, 120V 60 Hz Includes a complete set of calibration standards (0.02, 10 and 1000 NTU), two measuring cuvettes with light shield cap, operator's manual and 120VAC power adapter.


Accessories

Model Description
19785 Cable RS-232, Micro100 - Micro1000
19786 Batteries, lithium - pkg of 2
19889 Flow through assembly (complete kit)
19972 Replacement lamp module (white light)
19975 Pour through assembly (includes the assembly, locking ring, 24" of drain tubing, cuvettes and instructions).
19981 Cuvette stand (for storing empty cuvettes as well as calibration standards; holds up to 11 cuvettes)
22423S Replacement lamp module (Infrared)
22580 Universal power supply 100 - 240 volts
39825 ProCal Primary Calibration Standard - 10 NTU
39957 ProCal Primary Calibration Kit, Full Range, .02, 10, and 1000 NTU (for MicroTOL 2, 4 and Micro100)
50040 Formazin Stock Solution Kit - Primary Calibration - each kit contains: 32 onces of 4000 NTU Formazin, one gallon 0.02 NTU Reference Standard, four cuvettes with indexing light shields, three pipettes and instruction manual
50051 Cuvette 28 x 70 mm 3/pk (replaces 28 x 93 mm) use for grab sample. Includes threaded light shield caps.
50052 Cuvette 28 x 70 mm 10/pk (replaces 28 x 93 mm) use for grab sample. Includes threaded light shield caps.
70050 Wall power supply/charger 120 volts

 

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch