Engine & Gas Compressor Equipment From Kenco Engineering

Engine & Gas Compressor Equipment

Safety and Control Devices for Engine and Gas Compressor Applications

KEFS Electric Float Switch

The KENCO Model KEFS uses a float to determine the presence or absence of liquid in a vessel at the process connection. The float arm assembly consists of a float at one end and a magnet at the other. As the level in the vessel rises, the float rises and the magnet falls. The magnet actuates a second magnet on the other side of the pressure boundary. This second magnet causes the switch to change state.

<< Learn More >>

KPFS Pneumatic Float Switch

The KENCO Model KPFS uses a float to determine the presence or absence of liquid in a vessel at the process connection. The float arm assembly consists of a float at one end and a magnet at the other. As the level in the vessel rises, the float rises and the magnet falls. The magnet actuates a second magnet on the other side of the pressure boundary.

<< Learn More >>

KDV Dump Valve

The KENCO KDV Series "No-Freeze" Dump Valve is a pneumatically controlled valve designed for fluid level control in gas scrubbers, seperators and other process pressure vessels. Model KDV Dump Valves are available with either 1" or 2" process connections. The drain sizes are 1/2", 3/4" and 1" depending on the model selected. The valve actuation pressure range is 30-70 psi depending on the model and process pressure. Process pressure rating of up to 2000 psi are available.

<< Learn More >>

Pneumatic Float Switches

The Model 207 utilizes a Model 106 installed in a carbon steel tank. The tank features a sight glass and the wetted parts are carbon steel, brass, glass and Buna-N seals. The switch is designed to function as either a pneumatic high or low switch or as an automatic water make-up valve.

<< Learn More >>

KFS Fire Safe Valves

The Fire Safe Oil Control System provides two spring-loaded, thermally actuated valves. In the event of a fire, these valves automatically close, stopping the flow of oil from the crankcase of the engine and from the reserve oil supply.

<< Learn More >>

Low Flow Meter

The Kenco 1618 Low Flow Meter is part of an oil supply system for a stationary engine or compressor crankcase. The 1618 is installed on the inlet side of the crankcase, upstream of a Kenco Oil Level Controller. The 1618 Low Flow Meter will provide a constant, accurate measurement of oil consumption by the crankcase, the power cylinder lubricators, and the compressor cylinder lubricators.

<< Learn More >>

Proximity Switch

The KENCO Proximity Switch is installed into the divider block and is composed of a reed switch plus a magnet. When installed, the magnet rests against the divider block piston. The magnet is housed in the Proximity Switch body parallel to the reed switch. Each time the divider block pulses with a lubrication cycle, the piston moves the magnet, opening and closing the contacts of the reed switch.

<< Learn More >>

NFS No-Flow Safety Switch

KENCO No-Flow Switches mount in the line between the lubricator and cylinder. Oil flow is through the switch -- forcing the plunger off its contact. Its rate of travel is controlled by fluid slippage past the precision-fit plunger, preventing premature shutdown. If the lubricator stops pumping, the plunger will drift to the contact and stop the engine.

<< Learn More >>

Water Filler Cap Assembly

The Model 390 has an automotive type radiator cap. It is supplied with a 3/16" hole in the filler neck. The Model 29508 has an automotive type radiator cap. It is supplied with a 1/4? OD vent tube in the filler neck. The Model 1794 has a truck radiator cap. It is supplied with a 5/16? OD vent tube in the filler neck.

<< Learn More >>

Oil Supply Tanks & Stands

The KENCO Oil Supply Tank & Stand System is designed to supply lube oil to the crank case of a compressor or engine in an isolated location where daily supervision and maintenance are an impossibility. KENCO Oil Supply Tank & Stand Sytems used in conjunction with our oil level controllers with low level switches can provide 24 hour protection from lubrication failure. Oil Supply Tanks are available in 5, 15, 30 and 55 Gallon capacities.

<< Learn More >>

 

Product Range PDF Files

Engine,Gas,Compressor,Equipment,Kenco,Engineering Oil Level Controllers and Fire Safe Valves

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch