Kenco Magnetic Level Gauge (Magna-Site)


Low Flow Meter

Operating Principle:

Low,Flow,Meter,Kenco,EngineeringThe Kenco 1618 Low Flow Meter is part of an oil supply system for a stationary engine or compressor crankcase. The 1618 is installed on the inlet side of the crankcase, upstream of a Kenco Oil Level Controller. The 1618 Low Flow Meter will provide a constant, accurate measurement of oil consumption by the crankcase, the power cylinder lubricators, and the compressor cylinder lubricators. A single pole single throw reed switch is also available as an option; the switch will close momentarily every time the piston inside the meter strokes.
The Kenco 1618 is the low maintenance, cost-effective solution for visible and accurate readings of engine oil consumption.

Features:

  • Double action, single piston meter

  • Measures flow rates up to 5 gallons per hour

  • Provides an Indication of Engine Condition

  • Registers up to 9,999 gallons

  • Counter Immersed in Oil, Assuring Maximum Resistance to Wear From Vibration

  • SPST reed switch available(Model 14308)

Specifications:

MODEL 1618

MATERIALS OF CONSTRUCTION:
Housing - Aluminum
Seal Material - Buna-N
Chamber Seal Material - Teflon
Register Mechanism
 - Zinc Based Lusteron K Coated Lithographed Numbers

PROCESS CONNECTION:
Oil Inlet - 1/2" FNPT
Oil Outlet - 1/4" FNPT

DESIGN DATA:
Single Cycle Displacement - 1/50th Gallon
Single Stroke Displacement - 1/100th Gallon
Maximum Working Pressure - 50 psi
Maximum Flow - 5 Gallons per Hour
Accuracy - Factory Tested +/- 0.75%

* For Gravity Flow, Recommended Static Head Pressure Is 12 Feet Above the Oil Controller.

** IMPORTANT: When a 1618 meter is installed upstream from a KENCO oil level controller, the inlet pressure on the oil level controller will be reduced by one half. 

MODEL 14308

MATERIAL OF CONSTRUCTION:
Housing - Aluminum
Seal Material - Buna-N
Chamber Seal Material - Teflon
Register Mechanism
 - Zinc Based Lusteron K Coated Lithographed Numbers

PROCESS CONNECTIONS:
Oil Inlet - 1/2" FNPT
Oil Outlet - 1/4" FNPT
Conduit Connection - 1/2" MNPT

SWITCH DATA:
Circuitry - Single Pole Single Throw
Switch Closure Rate - 50 Closures per Gallon
Maximum voltage - 100 Volts DC
Maximum Current - 0.25 Amps DC
Maximum Power - 7.0 Watts

DESIGN DATA:
Single Cycle Displacement - 1/50th Gallon
Single Stroke Displacement - 1/100th Gallon
Maximum Working Pressure - 50 psi
Maximum Flow - 5 Gallons per Hour
Accuracy - Factory Tested +/- 0.75%

* For Gravity Flow, Recommended Static Head Pressure Is 12 Feet Above the Oil Controller.

** IMPORTANT: When a 14308 meter is installed upstream from a KENCO oil level controller, the inlet pressure on the oil level controller will be reduced by one half.

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch