Kenco KLCP Oil Level Controller


KLCP Oil Level Controller
[PNEUMATIC LOW LEVEL SWITCH]


Operating Principle:
KLCP,Oil,Level,Controller,Kenco,EngineeringKENCO Oil Level Controllers are designed to control a constant oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level.

The oil level switch in the KLCP is a pneumatic float switch which monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops 3/4" past the centerline, the pneumatic switch will trip, sending an alarm.

Applications:

  • Remote or offshore locations with no electric power.

  • Stationary engines and compressors

  • Mechanical lubricators

  • Pumps

Features:

  • Reduces maintenance by maintaining a constant lube level.

  • Protects against lubrication failure

  • Controller mechanism fully removable without draining oil

  • Easy view convex sight window

  • High pressure applications up to 70psi

  • Fire Safe Valves available

  • Oil inlet allows for piping configuration from any direction

  • Oil outlets on either side of housing and in the bottom to allow for various piping configurations

  • Switch test button standard

  • Direct mount adapters eliminate equalizing problems and reduce installation costs

  • Oil level controllers for synthetic oil applications now available

Specificaions:

STANDARD MATERIALS OF CONSTRUCTION:
Valve Seat - Buna-N
Optional Valve Seat Material - Fluorocarbon
Air Valve - Stainless Steel
Valve Orifice - Aluminum
Housing - Aluminum
Float Material - Closed Cell Polyurethane
Oil Inlet Screen - 20 Mesh Brass Cloth
Sight Window - Nylon (UV Stabilized)

PROCESS CONNECTIONS:
Air Inlet Connection - 1/4" FNPT
Oil Inlet Connection - 1/2" FNPT
Oil Outlet Connections - (3) 3/4" FNPT

OIL INLET DATA:
Static Head Pressure Range = 2-25 ft. / 0-9.5 psi
Maximum Temperature = 180°F / 82°C
High Pressure Models -
-A
= 10-35 psi
-B = 36-70 psi

MINIMUM FLOW RATE TEST RESULTS:
(Low Pressure Tested at 32ºF with SAE 30)
2' head - 1.141 GPH
4' head - 2.122 GPH
7' head - 2.853 GPH
12' head - 3.043 GPH
(High Pressure Tested at 20ºF with SAE 30)
5 PSI - 0.163 GPH
20 PSI - 0.266 GPH

PNEUMATIC SWITCH DATA:
Switch Trip Point - 3/4" Drop
Maximum Air Valve Inlet Pressure - 100psi
Maximum Temperature - 180ºF / 82ºC

SPECIAL FEATURE:
Switch Test Button

MOUNTING ADAPTER OPTIONS:
-1 = Clark MA & CFA
-2 = Clark HMB & TMB Compressor
-3 = Clark RA, HRA, HBA, HCA, HLA & TLA
-4 = Ingersol-Rand SVG & KVS
-5 = Ingersol-Rand KVG
-6 = Cooper-Bessemer GMW
-7 = Cooper-Bessemer GMV
-8 = Cooper-Bessemer GMX
-9 = Universal Mounting Bracket
-9MS = Housing with 4 Integral Mounting Studs
-10 = Universal Mounting Bracket with Slotted Adapter
-11 = Mechanical Lubricator Mounting Adapter
-12 = Post Mounting Adapter for 1/2" Pipe
-14 = White Compressor
-15 = Ingersoll-Rand XVG & PVG
-16 = Cooper-Bessemer BMV & 275
-17 = Waukesha VHP Engine (1) Bolt Hole Inspection Door
-18 = Waukesha VHP Engine (1) Bolt Hole Inspection Door with Low Flow Meter
-19 = Ingersoll-Rand Rotary
-21 = Cooper-Bessemer 2400 SERIES 6
-24 = Ariel JGE, JGH, JGK, JGR, JGT & JGW Compressors
-25 = Ariel JGU (4 & 6 Cylinder), JGZ (4 & 6 Cylinder) Compressors
-27 = Waukesha VHP Engine (2) Bolt Hole Inspection Door
-37 = Waukesha Inspection Door P9390
-38 = Waukesha Inspection Door P9390 with Low Flow Meter
-48A = Ariel JGB and JGV 4 and 6 cylinder Compressors
-48B = Ariel JGC and JGD 4 and 6 cylinder compressors with standard shaft rotation and a single chain drive / Ariel JGC and JGD 6 cylinder compressors with reverse shaft rotation and a dual chain drive
-48C = Ariel JGC and JGD 4 and 6 cylinder compressors with reverse shaft rotation and a single drive chain / Ariel JGC and JGD 6 cylinder compressors with standard shaft rotation and a dual chain drive
-991 = Dresser Rand HOS and VIP (4 & 6 Cylinder) Compressors
-C33/34 = Slotted Adapter Universal Mount for Caterpillar 3300/3400 Engines

ADDITIONAL OPTIONS:
Oil Inlet Pressure Options -
-HP-A = High pressure Oil Inlet, 5-35psi
-HP-B = High pressure Oil Inlet, 36-70psi
Fire Safe Valve Option -
-FS
= Fire Safe Valve
Extra Options -
-V
= Fluorocarbon Valve Seat
-K = Hose Kit

KLCP,Oil,Level,Controller,Kenco,Engineering KLCP Manual
KLCP,Oil,Level,Controller,Kenco,Engineering Oil Level Controller

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)


METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch