KLCM,Oil,Level,Controller,Kenco,Engineering

507 Series Oil Level Controllers For Mechanical Lubricators From Kenco Engineering


507 Series Oil Level Controllers For Mechanical Lubricators

Operating Principles:

507 Series Oil Level Controllers automatically monitor and control the amount of oil in the lubricator housing. This keeps all of the working parts including the pump plungers submerged in oil to reduce wear and corrosion. when the level falls below the operational requirement, the low level safety switch will be activated.

Applications:

  • Lincoln, Premier, and Mega Lubricator Boxes

Features:

  • Valve design eliminates lubricator box overfill due to contaminates in the oil

  • Controls oil level in lubricator

  • Low level safety switch protects against engine and pump repairs due to lubrication failure

  • Inlet pressures up to 60 psi

  • Non-mercury switch will not react to vibration

MODEL K507-L

The standard valve seat material is Buna-N, but may be ordered as Fluorocarbon for other types of lubrication. A 1/2" FNPT conduit connection is standard. The switch is case to ground, the circuit will remain open until the switch is activated.

MODEL 507-M

The standard valve seat material is Buna-N, but may be ordered as Fluorocarbon for other types of lubrication. A 1/2" FNPT conduit connection is standard. A basic two wire SPDT switch with form C contacts is standard. The enclosure meets NEMA type 4 classification.

Specifications:

MODEL K507-L

MATERIALS OF CONSTRUCTION:
Controller Housing - Aluminum
Valve Seat - Buna-N
Optional Valve Seat Material - Fluorocarbon
Valve Orifice - Aluminum
Float Material - Closed Cell Polyurethane
Oil Inlet Screen - 60 Mesh Brass Cloth

OIL INLET DATA:
Oil Inlet Connection - 1/2" FNPT

K507-L:
Inlet Pressure - 2'to 14' Head of Oil
Flow Rate - 2' Head @ 32°F, SAE 30; 1.1413 Gallons per Hour

K507-L-HP (High Pressure Model):
Inlet Pressure - 5 psi to 60 psi
Flow Rate - 5 psi @ 32°F, SAE 30; 0.6425 Gallons per Hour

ELECTRICAL SWITCH DATA:
Switch Trip Point - 3/4" Drop
Switch Rating - 2 amps, 30 VAC, or VDC
Electrical Connection - 1/2" FNPT Conduit Connection; 18 Gauge Wire @ 36" Long
Maximum Temperature - 211°F
Circuitry - Case to Ground

MODEL 507-M

MATERIALS OF CONSTRUCTION:
Controller Housing - Aluminum
Valve Seat - Buna-N
Optional Valve Seat Material - Fluorocarbon
Valve Orifice - Aluminum
Float Material - Closed Cell Polyurethane
Oil Inlet Screen - 60 Mesh Brass Cloth

OIL INLET DATA:
Oil Inlet Connection - 1/2" FNPT

507-M:
Inlet Pressure - 2' to 14' Head of Oil
Flow Rate - 2' head @ 32°F, SAE 30; 1.1413 Gallons per Hour

507-M-HP (High Pressure Model):
Inlet Pressure - 5 psi to 60 psi
Flow Rate - 5 psi @ 32°F, SAE 30; 0.6425 Gallons per Hour

ELECTRICAL SWITCH DATA:
Switch Trip Point - 3/4" Drop
Switch Rating - 5 amps, 250 VAC or VDC
Electrical Connection - 1/2" FNPT Conduit Connection; 22 Gauge Wire x 19" Long
Circuitry - Single Pole Double Throw
Enclosure - NEMA Type 4
Maximum Temperature - 211°F

WIRE COLOR CODE:
Red - Normally Closed
Blue - Normally Open
White - Common

KLCM,Oil,Level,Controller,Kenco,Engineering 507-L Manual
KLCM,Oil,Level,Controller,Kenco,Engineering 507-M Manual
KLCM,Oil,Level,Controller,Kenco,Engineering 507-K Manual
Engine,Gas,Compressor,Equipment,Kenco,Engineering Oil Level Controller